1 QUART OF KOTE OF ARMS MOLD AND MOULD RELEASE CONCENTRATE MAKES 2-1/2 GALLONS OF MOLD RELEASE
#WBR-032 - WATER-SOLUBLE CONCENTRATE TO USE, FOR ALL FORM OR MOLD TYPES, INCLUDING PLASTIC, RUBBER, METAL, FIBERGLASS, ABS, ETC. USE ON MOLDS TO MAKE CONCRETE STONE, CONCRETE TILE, MEXICAN SALTILLO, AND OTHER CAST CONCRETE PRODUCTS WITH OUR OLDE WORLD MOLDS. AVAILABLE IN OUR STORE.
NEED LESS THAN 2-1/2 GALLONS OF MOLD RELEASE?
Order our 8 oz. bottle from our Ebay Store and make 2-1/2 quarts by clicking the following link:
http://stores.ebay.com/Olde-World-Concrete-Molds_Stains-Chemicals_W0QQcolZ4QQdirZ1QQfsubZ18520868QQftidZ2QQtZkm
KOTE OF ARMS WATER-SOLUBLE MOLD RELEASE CONCENTRATE
DESCRIPTION: Concentrated emulsifiable base oil that can be diluted with water to produce a physical and chemical, V.O.C. compliant, form release agent. Effectively replaces petroleum distillates, dusty powders, and replaces other less effective and potentially hazardous materials. Environmentally Safe. Water Dilutable. Non-Staining. Non-Flammable. Odorless. Minimizes Voids and Pinholes. FOR COMMERCIAL USE ONLY.
DIRECTIONS: Mix at a 10-1 ratio with water… 10 parts water to one part KOTE OF ARMS Mold (Mould) Release Concentrate. Stir or agitate before each use to ensure proper dispersion of the solids. Spray diluted release onto mold surface to the point of saturation with hand sprayer, or brush on. Let dry approximately 1 hour before filling molds with concrete mix.
USE WHEN MAKING CONCRETE STONE, TILE, BRICKS, COBBLESTONE, PAVERS, FAUX STONE, VENEER, CEMENT, AND DECORATIVE CONCRETE WALKING SURFACES. SEE MOLDS ELSEWHERE IN OUR STORE.
NEED A TRUE CONCRETE SEALER? BELOW ARE SEALERS AVAILABLE FROM OLDE WORLD AS WELL
StoneKote: A water-based penetrating sealer that does not alter the appearance of the substrate.
MatteKote: A water-based sealer offering protection with a glossy shine.
GlazeKote: A solvent-based sealer offering protection with an ultra-glaze, deep, shine.
WE ALSO OFFER CONCRETE COLORANTS IN ONE-POUND AND FIVE-POUND BAGS. OR YOU CAN ORDER A SPECIAL "SET OF FIVE" CONSISTING OF ONE POUND, OR FIVE-POUNDS, OF EACH OF OUR FIVE BASE COLORS. WE NOW OFFER CONCRETE STAINS TOO!
EXPLORE OUR "EABY STORE" FOR MOLDS, AND OTHER SUPPLIES.
Our molds are made from a special .060 H.I. polystyrene or industrial ABS plastic and can be used fifty to a hundred+ times if cared for per our simple instructions.
With our process, you can make one tile or stone per day, per mold. If you have a large project, you may want to consider ordering a quantity of molds based on the number of tiles or stone needed, and your work schedule. As an example... it would take you ten days to produce 100 square feet of tile, using ten (one-square-foot) molds, 20 days using 5 molds, etc.
COMPLETE INSTRUCTIONS ARE INCLUDED WITH EACH PURCHASE.
SEE SHIPPING CALCULATOR FOR YOUR SHIPPING CHARGES.
SHIPPING INFORMATION - PLEASE READ
We normally ship from our Port Charlotte, Florida shipping facility on Tuesdays and Fridays each week. Orders are shipped via either UPS or USPS. Orders are normally ready within two days of receipt of payment. The rest of the time it takes to get to you is due to the carrier. Please allow sufficient time for transit before contacting our shipping department with questions about the whereabouts of your order. Please understand that it takes over a week "in transit" for packages shipped to the western USA. Figure ten days total. Please remember that UPS and other carriers DO NOT work on weekends... and once in a great while... we don't either! :-)
COMBINING ORDERS SAVES YOU SHIPPING CHARGES
WE DO COMBINE ALL PURCHASES FROM THE SAME CUSTOMER TO SAVE THEM IN SHIPPING COSTS. DO NOT PAY FOR THE INDIVIDUAL ITEMS. ORDER THE ITEMS YOU WANT. THEN REQUEST AN INVOICE FROM US. WE WILL COMBINE THE ORDERS AND SEND YOU AN INVOICE FOR THE TOTAL, INCLUDING SHIPPING.
If you must contact our shipping department regarding a shipment that you feel may be overdue, you may email: Help@Oldeworld.com or phone 941-624-5356.
ABOUT COLORS
We provide you with instructions in the various techniques to achieve a custom colored tile or stone. But other than formulas for the basic colors in our brochure, you will have to experiment. We cannot give you the formula for a color that is "in your head". Color is somewhat "subjective". What you might refer to as a "pink" color, might be our perception of a "rose" color. Our "powder blue", might be your "light blue", etc., etc. For that reason, we can only give you some "base" color formulas. You will have to work on any changes from that formula to get exactly what you want as a finished color, as seen in your mind's eye.
HOW MUCH STONE OR TILE CAN YOU MAKE IN A DAY?
With our process, you can make one tile or stone per day, per mold. If you have a large project, you may want to consider ordering a quantity of molds based on the number of tiles or stone needed, and your work schedule. As an example... it would take you ten days to produce 100 square feet of tile, using 10 molds, 20 days using 5 molds, etc., etc.
WANT THE FREEDOM AND INDEPENDENCE OF YOUR OWN BUSINESS... OR JUST WANT TO MAKE TILE AND STONE FOR YOUR OWN USE...
Become an "Olde World Tile" Producer Today!
Since 1992, we've trained over 200+ entrepreneurs worldwide to start and succeed in their own tile and stone manufacturing businesses! Our business is mold design and manufacturing, so our success is truly dependent on your success!
SEE OUR OTHER EBAY LISTINGS AND EXPLORE OUR EBAY STORE FOR MORE MOLD STYLES AND SIZES, SUPPLIES, AND FOR MORE INFORMATION ABOUT OUR BUSINESS OPPORTUNITY PACKAGES.
Check out our other items!
Be sure to add us to your favorites list!
For additional product information, tile and stone installation photos, and more... visit our extensive websites... www.TheMoldStore.com and www.Oldeworld.com, or if you have questions, feel free to call us at 941-624-5356 or email: Sales@Oldeworld.com
On Dec-05-06 at 20:08:28 PST, seller added the following information:
SquareTrade © AP6.0
On Mar-14-07 at 23:03:26 PDT, seller added the following information:
On Sep-14-09 at 16:59:11 PDT, seller added the following information:
Back to home page
) 
Olde World Concrete Molds
Print
Report item
and your 