1 #SL-A 18x18x1-3/4 SLATE FLAGSTONE CONCRETE STONE MOLD

AND YOU CAN START NEXT WEEK!

WHETHER YOU WANT THE FREEDOM AND INDEPENDENCE OF YOUR OWN BUSINESS... OR JUST WANT TO MAKE TILE AND STONE FOR YOUR OWN USE... WE ARE YOUR SOURCE!

YOU ARE PURCHASING ONE 18"X18"X1-3/4" THICK, NATURAL SLATE-FACED, STEPPING STONE MOLD, TO MAKE CUSTOM, HAND-CRAFTED FLOOR TILE, PAVERS, STONE VENEER, AND STEPPING STONES... FROM 1/2" UP TO 1-3/4" THICK!  THIS MOLD WAS TAKEN FROM A NATURAL BLOCK OF TEXTURED SLATE, AND HAS THE UNEVEN TEXTURE AND SIDES INHERENT IN THIS BEAUTFUL STONE. (THIS IS OUR #1818-SL-A) 

SEE OUR OTHER THREE MOLDS IN THIS STYLE THAT RANGE FROM 1-3/4" THICK TO 2-3/4" THICK.  OUR  COMPLETE SET OF FOUR MOLDS CONSIST OF #1818-SL-A,  #1818-SL-B, 1818-SL-C, AND 1818-SL-D. 

WANT VARIETY?

ORDER THE COMPLETE SET OF FOUR (4) DIFFERENT STEPPING STONE MOLDS.  CLICK ON THE FOLLOWING LINK TO GO TO THAT EBAY LISTING: 

CLICK HERE: http://cgi.ebay.com/LOT-OF-4-A-B-C-D-18x18-SLATE-CONCRETE-STONE-MOLDS_W0QQitemZ250219168196QQihZ015QQcategoryZ46572QQtcZphotoQQcmdZViewItemQQ_trksidZp1742.m153.l1262

 YOU CAN ACTUALLY MAKE THE STONE TO GO ON THE OUTSIDE OF YOUR HOME, FIREPLACE, WALLS, ETC., OR PAVER STONES FOR YOUR WALK, PATIO, POOL DECK, OR DRIVEWAY WITH THIS MOLD.  WE WILL GIVE YOU FORMULAS FOR BOTH REGULAR AND LIGHTWEIGHT STONE IF DESIRED.

YOU CAN ORDER AS MANY AS YOU LIKE AT THIS SPECIAL PRICE! 

Much of the tile and stone pictured in our Ebay photo listings was recently manufactured by purchasers of this or other styles of our molds, who had no previous experience making concrete tile or stone veneer! 

Our molds are made from .060, hi-impact, polystyrene, and can be used fifty to a hundred+ times if cared for properly!  The photo of the mold below illustrates the actual texture of this mold.

NEVER DONE THIS BEFORE?    IT'S REALLY EASY!   NO KILN NEEDED EITHER! 

COMPLETE INSTRUCTIONS ARE INCLUDED WITH EACH PURCHASE!

SEE "SHIPPING CALCULATOR" FOR YOUR SHIPPING CHARGES 

SHIPPING INFORMATION - PLEASE READ

We normally ship from our Port Charlotte, Florida shipping facility on Tuesdays and Fridays each week.  Orders are shipped via either UPS or USPS.  Orders are normally ready within two days of receipt of payment.  The rest of the time it takes to get to you is due to the carrier.  Please allow sufficient time for transit before contacting our shipping department with questions about the whereabouts of your order.  Please understand that it takes over a week "in transit" for packages shipped to the western USA.  Figure ten days total.  Please remember that UPS and other carriers DO NOT work on weekends... and once in a great while... we don't either!  :-)

COMBINING ORDERS SAVES YOU SHIPPING CHARGES

WE DO COMBINE ALL PURCHASES FROM THE SAME CUSTOMER TO SAVE THEM IN SHIPPING COSTS.  DO NOT PAY FOR THE INDIVIDUAL ITEMS.  ORDER THE ITEMS YOU WANT.  THEN REQUEST AN INVOICE FROM US.  WE WILL COMBINE THE ORDERS AND SEND YOU AN INVOICE FOR THE TOTAL, INCLUDING SHIPPING.

If you must contact our shipping department regarding a shipment that you feel may be overdue, you may email: Help@Oldeworld.com or phone 941-624-5356. 

ABOUT COLORS

We provide you with instructions in the various techniques to achieve a custom colored tile or stone.  But other than formulas for the basic colors in our brochure, you will have to experiment.  We cannot give you the formula for a color that is "in your head".  Color is somewhat "subjective".  What you might refer to as a "pink" color, might be our perception of a "rose" color.  Our "powder blue", might be your "light blue", etc., etc.  For that reason, we can only give you some "base" color formulas.  You will have to work on any changes from that formula to get exactly what you want as a finished color, as seen in your mind's eye. 

HOW MUCH STONE OR TILE CAN YOU MAKE IN A DAY? 

With our process, you can make one tile or stone per day, per mold.  If you have a large project, you may want to consider ordering a quantity of molds based on the number of tiles or stone needed, and your work schedule.  As an example... it would take you ten days to produce 100 square feet of tile, using 10 molds, 20 days using 5 molds, etc., etc.

Interested in starting your own business?   Become an "Olde World Tile" Producer Today!

Since 1992, we've trained hundreds of entrepreneurs worldwide to start and succeed in their own tile and stone manufacturing businesses!  Our business is mold design and manufacturing, so our success is truly dependent on your success!

SEE OUR OTHER EBAY LISTINGS AND OUR NEW EBAY STORE FOR MORE MOLD STYLES AND SIZES, AND FOR MORE INFORMATION ABOUT OUR BUSINESS OPPORTUNITY PACKAGES.

For additional product information, tile and stone installation photos, and more... visit our extensive TheMoldStore.com and Oldeworld.com websites, or if you have questions, feel free to call us at 941-624-5356 or email: Sales@Oldeworld.com

SquareTrade © AP6.0

AND DON'T FORGET TO VISIT OUR NEW TRAINING AND INFORMATION WEBSITE AT: www.TheMoldStore.info

Sellers: Get your own map today. Click here now. Simple.

The "HOW TO" process is so simple... virtually anyone can do it! It's like making a cake! But no oven is needed! HERE'S HOW... 1. Lubricate the molds... a light vegetable oil will do if you don't have mold release. 2. Mix a bag of pre-mix concrete… get a shovel, water, and something to mix it in. 3. Add some concrete color, which is optional… unless you want just plain gray. 4. Pour mix into molds… vibrate a bit to compact concrete and release air bubbles. 5. Let the filled molds sit a day or so, undisturbed… over-night is fine. 6. Carefully flip the molds over the next day… and pop out what you’ve created from the mold! That is obviously a simplified version of the process, but it is that easy. And FREE instructions and email support are included with each purchase.