You are bidding on

10 Sheets of Inkjet Rub-On Decal Transfer Paper + 4 oz Decal Tack

Description  Item only offered in USA AND CANADA

Type:	Inkjet Rub-On Decal Paper
Size:	8.5" X 11"
Printers:	All Desktop Inkjet Printers
Color:	Clear
Thickness:	Film .0015"  .0012mm  +/- .0002mm
Adhesive:	Provided by our Rub-On Tack  ( Liquid) included
Outdoor Life:	N/A
Instructions:	Included
Tools/Material:	Aerosol or Liquid Papilio Rub-On Tack required.
Note:	Indoor use only

Instructions

The Rub-on Decal Paper (media) can be used to make clear permanent production decals. The Rub-On decals will adhere to almost any substrate including; most types of plastic, metal, glass, marble, slate, unpainted wood, any painted substrate, great on most types of textured interior walls, ceramic bisque, porcelain bisque, any glazed or unglazed fired ceramic or porcelain, glass, most type of wax candles, and fiberglass.

Why use rub-on inkjet decal instead of self adhesive clear vinyl or water-slide decal?

The rub-on decal media offers certain advantages over waterslide decal paper and self-adhesive inkjet vinyl. Rub-on decals provide greater water resistance than water-slide decals not to mention clear inkjet vinyl, The rub-on decals are also thinner than vinyl and less prone to mechanical damage that may occur by the handling and use. The rub-on decals are also great to make permanent thin decals that almost look like they are printed on the substrate of the item they are used on. Water-slide decals are ideal for decorative items and hobby arts & craft creations whereas the rub-on transfer is a better choice for productions items. Rub-on decals will stick well to almost any substrate. Papilio Rub-on decals will accept almost any type of clear top coating. The Papilio rub-on decal media has been tested with and shows good compatibility with the following clear top coats; Oil Enamel, Acrylic, Epoxy, and two part Urethane.
1) Copy/Print on to the glossy side of the media.
2) Apply a thin coat of the Papilio Rub On Decal Tack. (If you are using Transfer Adhesive the follow the instructions that come with the transfer adhesive film.) Let the rub on decal tack dry for few hours, or over night. A second coat should NOT be applied.
Applying the decal.
1) Cut out the image with scissors while holding the paper at a constant 90 degree to prevent the media from sticking.
2) Apply the decal face down onto the substrate to be decorated.
3) Apply pressure to the back side of the paper using a solid object, such as a pen or pencil, working in a circular motion.
4) Use your fingers or a sharp object to lift off and discard the paper media. The artwork (the decal) will remain on the substrate.
For additional durability the Papilio Rub On Decal may be cover coated with various types of solvent based cover coats: epoxy, urethane, oil enamel, acrylic, etc.
This decal paper can also be used on various types of substrates: wood, marble, slate, glass, rock, different types of plastic, metal, most painted substrates, fiber glass, cardboard, etc.
DO NOT cut out the decal first and then apply the rub on decal tack as the edges of the paper will absorb the liquid making it difficult transfer the decal later.

Powered by eBay Turbo Lister

TERMS AND CONDITIONS