10 SHEETS Clear LASER Waterslide Transfer Decal Paper

Media size 8.5" X 11" Color/Pattern Clear Laser

Adhesive Type Gelatin Based - Adhesive type

Create your own decals with this high quality, water-slide decal paper for laser printers. This paper can be used with most laser printers, ALPS printers and color copiers. It is recommended to test a couple of sheets with your printer or copier to ensure compatibility prior to producing multiple copies.

The main use of this paper is for creating transfers decals for various uses such as: soap, candles, wood, furniture, plaques, plastic objects, computer frames, cardboard, ceramic, glass, enamel, metal plus other surfaces.

Create your own artwork with ink and paper or a computer drawing onto the blank, water-slide decal paper using an office copier, laser printer or ALPS printer.

How to print:

1. Begin by printing your image(s) from your computer onto your laser printer, color copier or ALPS printer with the use of BEL INC blank laser printer.

2. Print on the glossy side of the blank paper. If you have purchased soap paper or candle decal paper, your paper will have a plastic film to protect the sheets. Remove this film before placing it into the printer. Note: You should feed your printer one sheet at a time to avoid jamming the printer since this paper is thicker than regular paper. If you take it to a copy center, instruct the operator to feed the copier one by one the sheets to the copy machine.

3. Allow the ink to dry and set into the paper for at least five minutes and it should be ready for application.

4. Cut out the image(s) as close as possible to the actual design and place them in lukewarm water for approximately 30 seconds. Hold the decal carefully to avoid tearing. You will begin to feel the printed image start to slide off the white backing paper. This means it is ready to apply onto your surface to decorate.

5. Gently slide the decal into place. Use a clean damp cloth or paper towel to wipe off excess water and remove any air bubbles that may appear. Allow setting time of about 3 hours. Your decorated object is ready! Note: You can speed up drying time by placing your decorated object under/near a fan.

6. If you wish to protect your decorated item from surface scratches, moisture, or fading then spray your dried decorated surface with an acrylic varnish such as Krylon Crystal Clear finishing spray.



 

We also sell bake-on decal paper, listed in our store!  Above images shows a sheet of vintage bluebird decals, one decal cut, placed onto a ceramic heart & baked for permanent use.         (Tile can be cut!)