12' Commercial Kitchen Hood Energy Management System - eBay (item 280222831621 end time May-10-08 05:21:49 PDT)

Energy Management System for Commercial Kitchen Ventilation System.

Full capture and containment of heat loads while still reducing energy costs
20% reduction in fan speed equates to a 48% reduction in fan energy costs
Heated make up air savings is linear and reduces gas consumption on low speed
100% Airflow Override button with a fully adjustable timer
Low Maintenance – Monthly temperature probe cleaning only
Adjustable Set-Points Include: Fan Low Speed, Fan High Speed, Fan Activation Temperature, Fan High Speed Temperature, and Ramping Rate
Meets the requirements of IMC 507.2.1.1. which require exhaust fans to activate when cooking appliances are energized
Installed in Exhaust Hood utility cabinet and can be factory wired. Panel can also be wall mounted.
Fully modulating Digital Temperature Control

Commercial Canopy Exhaust Hood with make up air plenum

54” deep x 24” tall 12ft 0" Long Exhaust-Only Wall Canopy Hood with Front Plenum

-Factory install back standoff for 0 clearance rear

- 430 SS Where Exposed

- Fire Cabinet on the Right Side

- FILTER - 16" tall x 16" wide Kleen-Gard Stainless Steel Baffle Filter with Handles and Bottom Hanging Hook, UL Classified

- FILTER - 16" tall x 20" wide Kleen-Gard Stainless Steel Baffle Filter with Handles and Bottom Hanging Hook, UL Classified

- Incandescent Light Fixture, Bulbs By Others

- EXHAUST RISER - Factory installed 10" X 28"

- SUPPLY RISER - 8"x 36" Supply Riser with Volume Dampers

- 1/2 Pint Grease Cup New Style, Flanged Slotted

- Electrical Package Installation in Utility Cabinet by Plant.

Ansual Fire Suppression System
ANSUL-3.0/3.0 Ansul 6 gallon Fire System in Utility Cabinet (includes pre-piped hood(s) with detection, tank(s), release mechanism, microswitches and pull station)
- GAS VALVE - 1-1/4" Mechanical Shutoff Valve (Ansul) (26-55604) *FINAL HOOK UP, TESTS and PERMITS NOT INCLUDED*

Exhaust Fan
BDU20 Belt Drive Centrifugal Upblast Exhaust Fan with 20.75" wheel Exhaust Fan handles 3000 CFM @ -1.000" wc. Fan runs at 884 RPM. Exhaust Motor: 1.500 HP, 3 Phase 208 V, 4.7 FLA, ODP (Open Drip Proof)
- Grease Cup for kitchen-duty centrifugal exhaust fans, Box Dimensions 15-3/4 L X 5-1/16 W X 3-3/4 H (18 GA.)
- Curb CRB26.5x20E On Fan # 1
- Hinged Base for Curb. Standard Hinge attached to curb. Used on Fans with wheels 20 inches or smaller. 12 GA Galvanized.
- Vented Base for Curb

Make Up Air Unit

SA10 Untempered Supply Unit with 10" Blower in Size #1 Housing
Supply Fan handles 2400 CFM @ 0.250" wc. Fan runs at 763 RPM.
Supply Motor: 1.000 HP, 3 Phase 208 V, 3.3 FLA, ODP (Open Drip Proof)
Down Discharge - Air Flow Right -> Left

- Sloped Foam Filtered Intake for Size #1 Modular Untempered Supply Unit. 21.813" Wide x 44.375" Long x 23.375" High. Includes 2" Foam EZ Kleen Metal Mesh Filters.

- Curb CRB21X12 On Fan # 2

Energy Management System

EMS11102 Modulating Energy Management System to Control One Exhaust Fan and One Supply Fan. Includes VFDs, Duct Temperature Sensor and Override Control w/Exhaust on in Fire. INVERTER DUTY THREE PHASE MOTORS REQUIRED!