2005 2006 2007 Tacoma dash radio stereo kit Double Din

2005 2006 2007 2008 Toyota Tacoma Dash Kit  - Double DIN - $50 in free tools, wiring and crimp caps.

This auction for a Double DIN kit. Similar to picture below. The installation instructions show a single DIN unit.

Detailed installation instructions below.

Includes over $50 in the following free items:

1. Socket / Screwdiver Set - Value $20

2. Crimpers - Value $10

3. Tacoma Wire Harness - Value $15

4. Crimp Caps  - Value $6

5. Step by Step installation instructions -

 Single, Double and Access Cab

I WILL SHOW YOU HOW TO INSTALL - CLICK HERE

<

PLEASE READ BELOW!!

Find out how to get 20 crimp caps, crimping tool and a socket and screwdriver set - FREE!. These items along with the free wire harness will alleviate the need to cut any of the factory wires in your truck. Simply match the wire colors on your new stereo unit to the free wire harness and it will plug right into your truck without any cutting or hassles. Fast and Easy! As you can see in the picture the wires have already been prepped. Can't get much easier.

How to remove stock stereo (head unit):

1. You can use a screwedriver, but we reccomend a butter knife or paint scraper as show below. Gently pry out the A/C controls from the bottom as shown.

2. Remove the 4 bolts as shown and then slide out the old head unit.

3. Remove the plugs by simply pushing the retaining plastic and pull gently. The wire harness will connnect directly to these so you will not have to cut your wires.

This auction is for a dash replacement kit to upgrade the stereo in your 2005/2006 Tacoma.

While you are here, check out our other products to help you upgrade your sound system.

Upgrade those speakers fast and easy. Novice installers can get it done in under an hour. We have seen it done in 19 minutes. We give you detailed step by step instructions on our website.

FAST and EASY speaker upgrade kit

Front Speakers Before:

Front After: 

Rear Speakers Before:

Rear Speakers After:

This kit makes it very easy to change your stock speakers. Novice installers can do it themselves and save a ton of money over "professional" installation.

Don’t drill or cut your BRAND New TOY!!!

Install a new set of speakers with NO drilling,  wire cutting or splicing. No special tools.

    Phillips Screwdriver

    Small Flat Head Screwdriver

    10mm wrench, socket or pliers

    Drill with small bit (optional)

    Front Speaker Mounts

    Rear Speaker Mounts

    30 Bolts and Screws

    4 Toyota Harness Kits

    Website Link for installation tips and pictures.

.

    Subwoofer Cabinets

.