New Soneil Mobility Charger With 3 Pin XLR Connector. Great solution for most 24 volt systems. Whether your batteries are 12 amp hour or 55 amp hour, these chargers will work for you. Replaces most electric wheelchair or electric mobility scooter charging systems.
Pride
Merits
Quickie
Invacare
Shoprider
Most all others with female XLR socket - shown here
Small enough to be an "onboard" charger (splicing required). Comes with XLR plug for separate "offboard" charging systems. Call Frank with any questions, 1800 717 1252 we can make it work.
New Soneil Mobility Charger With 3 Pin XLR Connector for mobility scooters & wheelchairs

Will work as an onboard charger as well.

Charge like a professional and be proactive by stopping and reversing sulfation on contact. Mobility charger is the charger with a super brain. Like it or not, it's smarter than you are. Put the power of super computing to work for your battery. Blast battery destroying sulfation off your battery plates for longer battery life. It is the only charger of it's kind.

Features:

• U.S. Patent Pending
• De-sulfation of battery: The charger will remove loose sulfation and increase the battery life. (Hard sulfation cannot be reversed).
• Small size & light weight: Portability is a major feature. The charger can be installed on-board.
• One charger for any type of lead acid battery (no switch): Mobility charger charger will charge any type or brand of lead acid battery fully - Gel, sealed or dry battery. The charger will adjust itself as the battery gets old.
• Universal input: Any voltage from 90VAC to 264VAC (without any switch). This means you only need one charger for the whole world.
• Short circuit protection: If you touch the output +ve & -ve wires (with AC ON) and there will be no failure (no fuse will blow).
• Reverse polarity protection: If you connect the battery in reverse, there will be no failure (no fuse will blow).The charger will just not work. When the problem is corrected, the charger will operate normally.
• No current drain: If the AC is OFF and the charger is connected to the battery, there will be no drain of current from the battery.
• Low voltage start: Mobility charger charger will start charging from 0.5 volts. This means a very deeply discharged battery can be charged. Other chargers cannot do this.
• Maintain full charge & no overcharging: Mobility charger can be left connected to the battery indefinitely without harming (overcharging) the battery.
• UL, ULc (Canada), T-mark (Japan), TUV and CE (electrical EN 60335-1, Charger EN 60335-2-29, EMC - listed above) safety approvals.
• DC Output: 24 Volt 4 Amps
• Input: 90-264 Volts ~ 2 Amp Max. 50/60Hz
• LED Indicator: Orange: Charging Green: Charged
• 1 Year Manufactures Warranty