3-PORT FIREWIRE 800 1394B PCIe PCI-EXPRESS HOST CARD

Host Bus: 1-lane 2.5 Gb/s PCI Express
Multiple virtual channel (VC0,VC1 ) support for differentiating 1394 isochronous traffic.
Complies with 1394OHCI draft 1.2
Deep transmit/receive FIFO's
8 Kbyte isochronous transmit FIFO.
4 Kbyte asynchronous transmit FIFO.
8 Kbyte isochronous receive FIFO.
8 Kbyte asynchronous receive FIFO.
Eight (8) isochronous transmit/receive contexts
Two external and One Internal Bilingual ports
Bilingual ports with Screw Holes for thumbscrew locking Type 1394b Cable
Low Profile PCI Form Factor (Optional low profile bracket available).
 
This card combines an OHCI (Open Host Controller Interface) and a high-performance, standards-compliant PCI Express 1.1 host system interface to provide S800 1394b-2002 compliant throughput in a small PCB (Printed Circuit Board) and low power dissipation.

MultipleVCs (Virtual Channels) on the PCI Express link provide native support for QoS (Quality of Service) transmission for real-time and multimedia applications in a standards-based framework, ensuring compatibility with current and future operating systems. Active-state power management allows dynamic power management during periods of reduced network activity.

Technical Specification
PCI Express: Designed for compliance with PCI Express.
Multiple virtual channel (VC0,VC1 ) support fordiffe-rentiating 1394 isochronous traffic.
Supports eight user-programmable traffic classes.
64-bit and 32-bit platform support.
Interrupts via legacy INTx interface or message sig-naled interrupt (MSI).
Supports PCI Express clock power management viaCLKREQN signal for form factors that support thisprotocol.
Supports all linkpowermanagement states (L0,L0s,L1,andL2/L3) and active state power management(ASPM).
Supports wake-up from a low-power state via in-bandbeacon signaling and side-band WAKE_N signal.
 
OHCI (Open Host Controller Interface) Enhanced with the OHCI 1.2 draft specification for 1394b-2002 PHY full operational compliance.
OHCI 1.0 backwards compatible. Configurable via EEPROM to operate in either OHCI 1.0 or OHCI 1.1 mode.
Dedicated asynchronous and isochronous descriptor-based DMA engines.
Eight isochronous transmit contexts.
Eight isochronous receive contexts.
Supports parallel processing of incoming physical read and write requests.
Supports up to 48-bit addressing per OHCI specifica-tion for the physical DMA transfers.
 
1394b-2002 PHY  Provides three IEEER 1394b-2002 compliant ports sup-porting 1394b-2002 speeds of 800 Mbits/s and 400Mbits/s while maintaining backward compatibility to IEEE 1394a-2000 speeds of 100 Mbits/s, 200Mbits/s, and 400 Mbits/s over 4.5 m copper.
Fully supports provisions of IEEE 1394a-2000 and 1394-1995 standards for high-performance serial bus.
Link is not required for hub operation.
Supports extended BIAS_HANDSHAKE time for enhanced interoperability with camcorders.
 
 Number of Ports: Two External Bilingual ports with Screw Holes for thumbscrew locking Type 1394b Cable
One Internal Bilingual port
 
Operating System Requirements
Windows 7/VISTA/2000/XP and Windows Server 2003/2008
Mac OS 10.4.8 or newer
Linux 2.6.X
 
Certifications
CE Test: Approved
FCC Test : Approved
VCCI Test: Approved