A reserve price is the minimum price the seller will accept. This price is hidden from bidders. To win, a bidder must have the highest bid and have met or exceeded the reserve price.
Our upgraded RFX-3
3-mode rapid fire chip is now fully compatible with The June 11th Update to Call
of Duty 5 and also the September 3rd updated to Call of Duty 4. On top of those
changes we have also added a new user programmable speed to this chip. This will
help to future proof this chip for new games and possible updates by allowing
you to set and save a rapid fire speed in this new mode.
This mod has 3
different game modes. Each mode has speeds designed for specific games but these
are not the only games they will work for, this mod chip will work for almost
every first person shooter available with the addition of our user programmable
mode. To switch the game mode you must hold in the button (or sync button on
stealth installs) for aprox 3 seconds. You will see the player 4 LED flash. The
number of flashes indicates the game mode. When you switch the chip to a game
mode it will stay in that game mode unless you change it again by holding in the
button, even if you turn off your controller.
Mode 1:
Call of Duty 4 – This game mode has 3 setting, Fast, Slow and Burst fire.
This fast and burst fire will only work in COD 4 when you have the double
tap perk equipped.
Mode 2:
Call of Duty: Worlds at War - This game mode has 3 setting, Fast, Slow and
Burst fire. This mode is specifically for COD WaW to work around that patch
that tries to detect rapid fire controllers.
Mode 3:
User Programmable - This mode has one speed that can be set by the user from
6-25 shots per second.
To cycle through
the speed settings you only need to tap the button underneath the controller (or
the sync button if you used the stealth install). The player 4 Led will indicate
what mode you are in by flashing fast for the fast speed, slow for the slow
speed or staying on steady in the burst speed. Once you select a game mode and
speed setting, you will continue to use the trigger for firing as normal.
Our chips also have
LED modes. Because of the requests from our customers we have made this mod with
the ability to change how the LED functions. There are three modes for the LED’s
described below. To change how the LED works you must hold in the button (or
sync button for stealth installs) while you are turning on the controller.
LED MODE 1 (default) - Blinking LED, the speed of blinking changes
with the speed of rapid fire.
LED MODE 2 - Blink to solid LED. The LED will blink 1, 2 or 3 times
depending on the mode then stay on solid.
LED MODE 3 - No LED, the LED will be off all the time for the ultra
stealth look.
This chip will work in all
Microsoft wireless controllers.
(Ask us about a special version of this chip for
wired controllers)
Don't be fooled by other mods which have just
reduced the rate of fire below the detection of the game. Our mod will blow them out of the water.
But don't just take our
word for it see the video demonstration below.
RFX-3 3-Mode Rapid fire Demo
(Note - This video is
for demonstration purposes only, there is NOT a
controller included in this auction)
User Programmable mode Instructions
Because you will already have your controller
open we are including 4 Blue SMD LED's so you can change your status LED's from
a dull green to bright Blue, for FREE!
What is included in the kit:
(1) Pre-programmed PIC micro controller
(1) high quality tactile button (rated for
100,000,000 presses)
Aprox 18" of two different colors of wire.
(4)
Blue SMD LED's for your player status ring
Tutorials in PDF format with high
resolution pictures.
We provide original high resolution
installation tutorials
We test all chips prior to shipping to
prevent defective products.
We
have over 5 years experience in console and controller modding.
The rumble feature of your controller
will continue to work!
Fast and personal customer service (just
look at our feedback)
Fast shipping, most items ship within 24
hours!
Please email us with any questions!
Default Chip functions:
Right button = change between fast,
slow and burst fire modes for the right trigger (disabled by default)
To change to the COD 5
compatibility you must Press and hold the new button for 3 seconds. At which
point the player 4 LED will flash twice indicating the COD 5 compatibility mode
is on. You can follow the same process to turn the compatibility mode off and
the player 4 LED will flash 3 times. The chip will remember if the compatibility
mode is on or off even when you turn your controller off or remove the
batteries. So if you only play COD5 you can turn it on once and you will never
need to do it again.
Disclaimers:
Although this chips is very fast you are still limited by how fast the game allows a weapon to shoot.
Installation is done at your own
risk. I will not be held responsible
for any damage to yourself, your
controller, your Xbox 360 console or
any other equipment.
Chips damaged due to improper
soldering or mishandling will not be
replaced under warranty. But can be
replaced for a small fee once the
damaged chip is returned.
The compatibility mode of this mod is
designed to work with the call of duty 5 patch that was released on November
10th 2008. We make no guarantees that any mode of this mod will continue to work
if future game patches are released for COD 5 or any other game. Changes/patches
within any game which limits the ability of this controller are NOT covered
under warranty.
This product is not recognized or endorsed by Microsoft. While it DOES
NOT alter program code or network status, it might be seen as an unfair
advantage by some players. Thus, we personally recommend that it be used only in private games.
Only kits which have not been installed may be returned for a refund.
Refunds are given less actual shipping charges.
Mod kits do not have a warranty as we cannot guarantee that they are
installed and handled properly.
All chips are tested prior to shipping to prevent defective chips
Shipping to the United States is by USPS First Class Mail.
We ship internationally to Canada, United Kingdom and select other locations via
US airmail mail (7-10 working days to most locations)
International buyers are responsible for all import fees, VAT and taxes.
We ship only to Paypal confirmed addresses unless prior arrangements are made.
Shipping and handling
Item location: Duncan, South Carolina, United States
*The estimated delivery time is based on the seller's handling time, the shipping service selected, and when the seller receives cleared payment. Sellers are not responsible for shipping service transit times. Transit times may vary, particularly during peak periods.
Back to home page
) 
Console Customs
Print
Report item
and your