4 Tap Kegerator Conversion Kit With 4 Corny Kegs

Kit comes with all hoses and dis-connets assembled

This kit has everything you need to dispense your homebrewed beer (except the beer); you have to make that yourself.  This is very easy to set up.  Drill hole in Refirgerator door, insert shank, and attach beer nut and gasket assembly.

The Kit Includes:

• 1 new (empty) Aluminum 5 lb. CO2 cylinder
• 2 gauge CO2 regulator with check valve
• 4' of commercial grade 5/16 gas hose  from the regulator connected to a 4 port manifold with shut off and check valves with 4' of commercial grade 5/16 gas hose from the manifold to each keg dis-connect.
• 4 5' Shank for Refrigerator with all hardware and 5' of beer hose attached to keg dis-connect
• 4 Metal Faucet that screws directly into Shank
• 4 Cornelius style 5-gallon ball lock keg, reconditioned and pressure tested.
• 1 Standard Faucet Wrench

• Drip tray is NOT included as in picture.

  May be purchased separately

• This kit can also be made to different specifications - E-mail me at address below if needed

Everything in this kit is new (except the keg)  

Kegs have been dis-assembled, inside cleaned with a PBW solution, washed and cleaned on the outside, re-assembled with new o-rings on the dip tubes and poppets, a new o-ring is placed on the lid, and the cornie is pressure-tested.  All decals and stickers, and glue have been removed.  Kegs are also "polished" on the outside.   The kegs you receive will not be the ones that are shown in picture.  Kegs will be shipped with black tops and bottoms, other colors available upon request.  However, please note there is a limited quantity of other colors.    Please allow seven to 14 days for delivery.  

E-mail me at terry@kegglebrewing.com with any questions or comments.