With Frisby FS-6200 2.4 Ghz RF Wireless 5.1 Channel Home Theater System, your home music options have never been better. The Frisby FS-6200 optimizes wireless high frequency RF technology to achieve the best quality in-home audio experience possible.
The system includes a center channel and 4 tower satellite speakers and produces rich bass, powerful midrange and crystal clear highs. The system is Dolby Digital DTS AC-3 5.1 ready with HQ BASS technology for intense low frequency response. Powerful 5000 Watt PMPO amplified subwoofer with ported wood enclosure consists of high gloss front panel piano finish and full magnetic shielding. Frisby FS-6200 is a very high end surround sound system and worth every penny and has convenience to delivery to your home, you won't be disappointed
Wireless Rear Speakers (with wired option): Uses high frequency 2.4 Ghz RF technology to eliminate the need for wires running from the front of the room to the rear. The units in the FS-6200 communicate each other through a combination of wiring and 2.4 Ghz RF frequency (wireless) signals. As shown in the illustration below, wireless receiver box centered between the rear speakers communicates through a wireless transmitter located within the subwoofer.
Professional sound performance and powerful sound quality powered with 5000 Watt PMPO subwoofer and 5 channel amplified satellite speakers
With 4 AUX LINE-IN, you can directly connect this surround sound system to your TV, MP3 Players, Game Consoles, CD, DVD player or any COMPUTER or a LAPTOP without any additional equipment.
Both speakers and the subwoofer are magnetically shielded, no need to worry about the screen nearby
Infrared remote control and front panel control keys. The remote control has Power, Mute, DVD 5.1, Stereo, Aux 1, Aux 2, 5.1 Channel, 2.1 Channel, Tach Switch, Reset, and Volume, Treble, Bass controls.
Safety protection by adding power fuse to the woofer. Extra fuse is also included with the system.
HQ BASS technology. Sensational audio effect.
High Gloss Piano Finish Front Panels on both woofer and speakers and Wooden case for whole set
Dolby Digital, Dolby DTS, AC-3 5.1 Ready
The system is complete, comes with power cord and all audio cables
CONNNECTIVITY
This Speaker system supports connection to ANY
audio source with external 3.5mm or RCA / Component style
jacks. (Connection to 2.5mm or .250 is supported by adapter)
Both Stereo and Surround Sound devices are supported. The
package includes 3 sets of RCA to RCA cables and 3 sets of
3.5mm to RCA adapter cables.
Computer
Systems - Stereo & Surround Sound Connection
Any Brand, Any Model, Any Operating System. PC or MAC, Desktop,
Laptop, Tablet, Windows, MAC OS or Linux.

For Stereo connection insert the 3.5mm adapter
into the headphone/audio output jack of your computer. This
usually has a headphone symbol or green index. Use an RCA
to RCA Cable to connect the adapter to the RCA input jacks
marked FL and FR on the rear panel of the speaker system.
Match the color coded connectors Red to Red and White to White.
For Surround Sound connection insert a 3.5mm adapter into
each of the 3 audio output jacks of your computer. These are
usually marked with green, black and orange indexes. Use an
RCA to RCA Cable to connect each adapter to the RCA input
jacks on the rear panel of the speaker system. The Green output
should be matched to the RCA inputs marked FR(Front Right)
and FL(Front Left) Match the color coded connectors Red to
Red and White to White. Repeat the procedure to connect the
Black ouput to the inputs marked RR(Rear Right) and RL(Rear
Left). The Orange output should be matched to the inputs marked
Sub(Subwoofer) and Cen(Center Channel).
This Speaker system has 2 operating modes. 2.1 Stereo (2
channels, left and right) and 5.1 Surround Sound(SS) (6 channels,
FL,FR,RL,RR,CC,SW). Match the operating mode to the content
and player you are using by selecting the 2.1 button or the
5.1 button on the remote control.
Stereo audio content (CD, Old Movies, MP3) may be played
be from any Stereo equipped computer with 2 channels connected
and the speaker system set to 2.1 mode. You will receive 6
speaker Stereo play. Note: Surround Sound content played on
a Stereo computer produces Stereo output (Example: Surround
Sound Movies or On-line Games played using 2 channel DVD player
or Sound Card will produce Stereo output). Stereo content
played on a 6 channel Surround Sound computer produces 2 channel
Stereo output (Example: CD audio, or old movies recorded in
Stereo played on a Surround Sound PC) The speaker system should
be set to 2.1 mode for any Stereo content/signal/connection.
Surround Sound (SS) audio content (usually newer movies on
DVD, or Online Games) should be played on an SS capable computer
equipped with 6 Channel DVD player, and SS card/chipset. (Older
2 Channel DVD players will not produce Surround Sound) All
6 inputs must be connected and the speaker system set to 5.1
mode. Remember Stereo input means Stereo output. Surround
Sound input produces Surround Sound output.
AUXILIARY Connection: This Speaker System includes 2 sets
of RCA style Auxiliary inputs(AUX1,AUX2). This supports connection
of 2 additional Stereo audio sources. Connect your device
using RCA to RCA cables , use the 3.5mm to RCA adapter if
necessary. Select your preferred audio source using the Auxiliary
buttons on the remote control. (Example: Connect your PC to
AUX1, your IPOD to AUX2, and your Surround Sound audio source
to the 5.1 input section)
Home
Entertainment Systems - Stereo & Surround Sound Connection
Any Stereo or Surround Sound Home Audio component
with 3.5mm or RCA outputs. .250 Connection requires an adapter.
Any Brand, Any Model. Amps, Cable Box, CD, DVD, DVR, MP3,
MP4, Receivers, Tape Players, Tuners, Turntables, TV, VCR
For Stereo connection insert the 3.5mm adapter
into the headphone/audio output jack of your audio device.
Use an RCA to RCA Cable to connect the adapter to the RCA
input jacks marked RL and RF on the rear panel of the speaker
system. Match the color coded connectors Red to Red and White
to White. You may also use the RCA to RCA cable to connect
the line out jacks of your device directly to the speaker
system.
For Surround Sound(SS) connection use an RCA to RCA Cable
to connect all 6 SS outputs on your device to the SS inputs
on the Speaker system. Match each output to each input, FR
to FR, FL to FL etc. 6 Channel connection is required for
Surround sound.
This Speaker system has 2 operating modes. 2.1 Stereo (2
channels, left and right) and 5.1 Surround Sound(SS) (6 channels,
LF,RF,LR,RR,CC,SW). Match the operating mode to the content
and player you are using by selecting the 2.1 button or the
5.1 button on the remote control.
Stereo audio content (CD, Old Movies, MP3) may be played
be from any Stereo device with 2 channels connected and the
speaker system set to 2.1 mode. You will receive 6 speaker
Stereo play. Note: Surround Sound content played on a Stereo
device produces Stereo output (Example: Surround Sound Movies
played using 2 channel DVD player will produce Stereo output).
Stereo content played on a 6 channel Surround Sound computer
produces 2 channel Stereo output (Example: CD audio, or old
movies recorded in Stereo played on a 2 Channel DVD) The speaker
system should be set to 2.1 mode for any Stereo content/signal/connection.
Remember Stereo input means Stereo output. Surround Sound
input produces Surround Sound output.
Surround Sound (SS) audio content (newer movies on DVD) should
be played on an SS capable 6 Channel DVD player. (Older 2
Channel DVD players will not produce Surround Sound) All 6
inputs must be connected and the speaker system set to 5.1
mode.
AUXILIARY Connection: This Speaker System includes 2 sets
of RCA style Auxiliary inputs(AUX1,AUX2). This supports connection
of 2 additional Stereo audio sources. Connect your device
using RCA to RCA cables , use the 3.5mm to RCA adapter if
necessary. Select your preferred audio source using the Auxiliary
buttons on the remote control. (Example: Connect your PC to
AUX1, your IPOD to AUX2, and your Surround Sound audio source
to the 5.1 input section)
USB Flash Memory Player: This model includes a Type A USB
port. Insert your Flash Player select MP3 as your audio source
and use the Play/Pause, Advance and Reverse buttons to control
play.
Personal
Entertainment Systems - Stereo Connection
This covers a wide range of small portable or
handheld players with 3.5mm Stereo Headphone output. 2.5mm
connection requires an adapter
Any Brand, Any Model. CD, DVD, MP3, MP4, Games Systems. Apple
IPOD, Creative ZEN, Microsoft ZUNE

For Stereo connection insert the 3.5mm adapter into the headphone/audio
output jack of your device, then use an RCA to RCA Cable to
connect the adapter to the RCA input jacks marked RL and RF
on the rear panel of the speaker system. Match the color coded
connectors Red to Red and White to White.
These are Stereo devices which play Stereo content and file
formats. Surround Sound connection is not supported for these
devices
This Speaker system has 2 operating modes. 2.1 Stereo (2
channels, left and right) and 5.1 Surround Sound(SS) (6 channels,
LF,RF,LR,RR,CC,SW). Match the operating mode to the content
and connection you are using by selecting the 2.1 button on
the remote control. Stereo audio content (CD,MP3, etc) should
be played with the speaker system set to 2.1 mode. You will
receive 6 speaker Stereo play. The speaker system should be
set to 2.1 mode for any Stereo content/signal/connection.
Remember Stereo input means Stereo output.
Game
Consoles - Stereo & Surround Sound Connection
Game systems equipped with Stereo output (3.5mm,RCA)
or Surround Sound output using optical connection. For Online
or PC based Games please check the computer connection section
above.
All Brands, All Models. Microsoft X-Box &
360. Sony Playstation PS2, PS3, PSP. Nintendo GameCube Wii
For Stereo connection insert the 3.5mm adapter into the headphone/audio
output jack of your game system, then use an RCA to RCA Cable
to connect the adapter to the RCA input jacks marked RL and
RF on the rear panel of the speaker system. Match the color
coded connectors Red to Red and White to White. Game systems
with RCA outputs may be connected in the same way without
using the headphone adapter.
Games Systems only support Surround Sound connection via
Optical Cable. This speaker system does not support Optical
connection. If your prefer Surround Sound please select one
of our speaker systems with optical input.
This Speaker system has 2 operating modes. 2.1 Stereo (2
channels, left and right) and 5.1 Surround Sound(SS) (6 channels,
LF,RF,LR,RR,CC,SW). Match the operating mode to the content
and connection you are using by selecting the 2.1 button or
the 5.1 button on the remote control.
Stereo audio content (old Games) should be played with the
speaker system set to 2.1 mode. You will receive 6 speaker
Stereo play. Note: Surround Sound content played using a Stereo
connection produces Stereo output. The speaker system should
be set to 2.1 mode for any Stereo content/signal/connection.
Warranty
: 1 year ; No seller on Ebay can beat our warranty period
, and that shows how much confidence we have in our Frisby
products
|