5in1 Ultimate Amplifier Plug&Play Yagi WiFi Antenna KIT

Fixed Indoor/Outdoor Installation
The Ultimate 5-in-1 Yagi WiFi Antenna Kit
Driven by the Powerful RF Amplifier
Plug and Play
for those who are hungry for an extra Horse Power

(A) +18dBm 16 element 2.4GHz High Performance Yagi antenna with pole mounting Assembly.

Specifications

Operating Range: 2400-2500 MHz   Transmit Gain: +24dB   VSWR: <=1.5   Impedance: 50 Ohm   Polarization: Vertical or Horizontal   HPBW Beam Width/Horizontal: 48 deg.   HPBW Beam Width/Vertical: 30 deg.   Power Handling: 100 W   RF Connector: N-Female

Environmental and Mechanical Characteristics

Survival Wind Speed: 60 Km/hr   Temperature: -40 ~ +80 deg. C   Humidity: 100% @ 25 deg. C   Lightning Protector: DC Ground   Radome Color: Gray White   Weight: 1.8Kg   Dimensions: 863mm H x 95mm D

(B) DC to 6GHz Lightning Arrestor (N-male/N-female)

Frequency: DC - 6 GHz
0.1 dB insertion loss at 2.4 GHz
Return Loss: 25 dB max, V.S.W.R 1.1: 1
Uses Gas Discharge Cartridge
Rated 20 K Amp discharge
Max RF power 75W ·  Impedence: 50 Ohm
Type N Male to Type N Female Bulkhead

(C) 15ft LMR-195 Ultra Low-Loss RF Cable (N-male to RP-SMA)

Flexible: With a 1/2-inch minimum bend radius, LMR-195 cable is substantially more flexible than RG-142 and very comparable to RG-58, and affords much lower loss, greater shielding and lower cost.
Low Loss: LMR-195 has lower loss than other RG58/RG142 ’type’ cables. This is achieved through the use of a high velocity gas-injected closed cell foam dielectric and bonded aluminum tape outer conductor.
Weatherproof: The UV protected black polyethylene jacket makes the cable rugged and resistant to the full range of outdoor environments. Various jacket materials are available to address other indoor and outdoor requirements.
RF Shielding: The bonded aluminum tape outer conductor is overlapped to provide 100% coverage, resulting in >90 dB RF shielding (>180 dB crosstalk) and excellent interference immunity (ingress and egress); a substantial improvement from RG58’s 40 dB and RG142’s 60 dB performance level.
Phase Stability: The intimately bonded structure and foam dielectric of LMR cables provide excellent phase stability over temperature and with bending. The high velocity dielectric results in superior phase stability as compared with RG58 & RG142 solid dielectric cables.

(D) +30dBm (1000mW) RF amplifier

Advanced RF circuitry design with double layered SMT stripline electronics, delivering a gain with high signal-to-noise ratio. Suitable for point-to-point and point-to-multipoint range coverage.

The TurboTenna 012XT Amplifier Booster is designed for use by professional systems integrators and system fabricators.

The unit is designed to operate using a standard 32mW or 100mW radio device such as a Buffalo access point with adjustable power output.

Compatible with 802.11B and 802.11G wireless networks.

Made of high quality, RF shielding metal casing.

Precision engineered for maximum signal strength and distance.

When determing total power add the radio output to the TX amplifier gain and subtract th eRF cable loss between the radio and amplifier. This total should not exceed 1000mW or +30dBm.

Example: A 32mW radio (+15dBm) with a short pigtail (-1dB) running to the TurboTenna 012XT amplifieir at TX gain of 13dB would yield a total power output of +27dBm at the atenna port of the amp. You would then add the gain of the antenna minus any cable loss between the amp and antenna to determine your effective isotripic radiated power level or EIRP.

(E) The New DN8318 802.11n 300Mbps USB WiFi Adapter

The DN-8318 provides an external antenna connector. It takes advantage of the flexibility and convenience of USB connections without sacrificing performance. Support of 64, 128 and 256-bit WEP encryption plus WPA (Wi-Fi Protected Access), WPA2, WPA-PSK, WPA2-PSK (AES/TKIP) high-level encryption keep your wireless communications from unauthorized access and ensure secure data transfer.

The WL-U356A supports software AP function, which can turn the USB into a compact Access Point. The USB adapter is also backward compatible with 802.11b and 802.11g products, so both 11b and 11g clients can reside on the same network. Easy installation and hot-plugging offers full mobility and high availability, making the device a perfect choice for users who are getting tired of running cables or in constant need of wireless access. 

Specifications

Standards: IEEE 802.11b/g, 802.11n (DRAFT 2.0)   Frequency: 2.412 to 2.48 GHz ISM band   Mac/BB Processor: RT2770, RT2720   LED Indicators: Active/Power   USB Interface: USB2.0/1.1   Antenna External Antenna Interface RP-SMA-female   Data Rate (Auto fallback): Up to 300Mbps   Transmit Power: 802.11b 23 +/-2dBm 802.11b 18 +/-2dBm 802.11n 17 +/-2dBm   Receive Sensitivity: -66dBm@ 802.11n -76dBm@54Mbps -91dBm@11Mbps -95dBm@1Mbps   Power Consumption: Transmit: <500mA, Receive: <300mA   Security: 64/128-bit WEP [Hex & ASCII], WEP, WPA2, WPA-PSK, WPA2-PSK [AES/TKIP]   Operating System Windows XP, VISTA 32/64-bit, Linux and Apple Mac

Environmental and Mechanical Characteristics

Operating Temperature: 0 to 55 deg. C   Storage Temperature: -20 ~ 70 deg. C   Humidity: 5 to 90% [Non-condensing]

TurboTenna^® is a registered trademark of danets - DataCom Network

Package Content:

ask danets1638 a question:
sales@danets.com 

Buyers who look at this item are also interested in the NextG USB-Yagi Plug & Play antenna and the 5 meters extender USB2.0 cable: