6 - 25x32 MERV 9 Polyester Air Filter Media pads and 1 GRID WIRE. Filter media is ONE inch thick.
The GRID WIRE is permanent and after installed you will only need to change the filter media.
Questions? Call us at 713-784-8061.
These will work great if you have an Air filter Grill in the wall or ceiling.
Open your air filter grill in the wall or ceiling. Measure the inside dimensions of your air filter grill (where the air filter goes), length x width. Once you are sure you have the correct measurements, you will be ready to purchase and your filters will be on the way to you soon.
Remove the GRID WIRE from your shipping package. The GRID WIRE may be bent and folded several times for shipping.
Easily unfold the wire and straighten as seen in the photo. Then open your air filter grill and install the GRID WIRE into your air filter grill. You may cut and bend a few prongs on the GRID WIRE if needed, and bend these prongs behind the air filter grill retaining lip. This will hold the GRID WIRE securely and permanently in the air filter grill.
Now you can simply place the loose filter pad media against the GRID WIRE in the air filter grill (turn your fan to the on position and this will hold the filter media). Installation is a snap, and once the GRID WIRE is properly installed, you only have to change the filter media pad.
Easy and affordable.
Exact shipping. Amazing low ebay price. Save money with this excellent filter media.
Excellent filter media for your home or office. High MERV 9 rating.
Excellent for your AC unit, heater, furnace, or air cleaner.
Highest efficiency polyester media MERV 9 Rated. High performance Dustlok® polyester air filter media. Filter pad media is one inch thick. Very easy to install.
Dustlok® Gold Media, manufactured at Fiber Bond provides the highest level of filtration in a polyester media. MERV 9 with no electrostatic enhancement. Dustlok® adhesive stops and retains small particulate. Dustlok® adhesive re-activates throughout its service life.
The WHITE side of this media is the air entering side. The GOLD side is the air exiting side.
Minimum efficiency Removes 90% 7-10 microns.
MERV 9 - ASHRAE 52.2 - 1999
Operating temperature up to 200 degrees F.
Initial Resistance - 0.21" w.g. at 295 fpm.
Recommended discard point 1.0" w.g.
MINIMUM ASHRAE 52.2 PERFORMANCE:
1 to 3 microns 39.8%
3 to 10 microns 85.4%
Minimum Efficiency removes 90% 7-10 microns.
Dustlok®
Provides long service life and high dust holding.
Keeps your coils and fans clean.
Improve your indoor air quality.
Made with SPOR-AX® antimicrobial. This is a biocide that effectively controls the growth of mold, mildew, algae, and fungi on the media.
Uniformly coated with DUSTLOK® ADHESIVE on the downstream fibers during formation of the media. DUSTLOK® absorbs the dust particles, trapping them on the surface of the individual fibers. DUSTLOK® will not migrate or dry out. The Dustlok® will be sticky to the touch.
A HIGH Performance CONCEPT AIR FILTER MEDIA. Featuring cleaner air for you and your home.
We can custom make any size air filter for your home. Please call or email us if you have any questions or if you do not see your size listed in our store.
H&B Air Filter Co. 713-784-8061
Dustlok ® and Spor-Ax® are registered trademarks of Fiber Bond Corporation.
Fiber Bond Corporation | 110 Menke Road | Michigan City, IN 46360
Tel.: (219) 879-4541 | Fax: (219) 874-7502
Back to Search Results
) 
hbairfilters
Print
Report item
and your