6-in-1 Multi-Function Meter Tester EC CF TDS PH °C °F

 

KEY STRENGTHS:
This Six-in-One meter has been re-engineered w/ BUILT-IN RECHARGEABLE BATTERY to save you from the hassle of buying, placing & replacing button batteries. Now all you have to do is charge the Built-in Rechargeable Battery the first time you use it, then recharge it again as needed. The built-in battery can last at least 3 years, with standard charging time of approximately two (2) hours. Also feature is the much more reliable electrodes, you can be confident that the results are 100% accurate and reliable!

PHT-026 device can measure up to six range.The Multi-parameter Water Quality Monitor is a versatile, high-accuracy multi-parameter instrument with reliable multi probe system and with all the functionality of a multi-parameter system. It combines the versatility of an easy-to-use, easy-to-read unit with all the functionality of a multiparameter system. Featuring simultaneously measures and displays pH, temperature (°C or °F), and EC, CF or TDS (ppm) with a single push of a button.

This combo tester is easy to use and indeed affordable plus makes it possible for non-technical and technical personnel alike to measure pH, °C, CF, EC, °F, and TDS on the spot, accurately and inexpensively throughout a variety of industries. No more switching meters to measure the pH, °C or °F and then the EC, CF or TDS of a solution.

The fast, efficient, accurate and portable, more precise measurement meets the requirements of your routine multi-measurements. And it comes with FREE pH6.864 and pH4.003 CALIBRATION SOLUTIONS and an AC ADAPTOR FOR US or UK or EUROPE or AUSTRALIA.

Standardizations:
We constantly keep in mind that the safety of the user should always comes first. We made sure that our product bears the CE Marking and every components comply with the requirements and conform with the essential health and safety requirements set out by the European Directives.

Simultaneously analyze 6 water quality parameters with a single submersible probe system. Experience the diversity of having an all-in-one device!

Buy Now!

Features: Efficient, accurate, reliable, easy and safe to use

• With Built-in Rechargeable Battery that last at least 3 years!
• Simultaneously read results
• With enhanced and more reliable set of electrodes
• Comes with FREE protective cap, replaceable pH Electrode, calibration screwdriver, pH6.864 and pH4.003 CALIBRATION SOLUTIONS
• Manual is provided for quick and easy installation and to best utilize PHT-026
• Has large digital Display system for easy reading
• A FREE AC POWER ADAPTOR for Australia, UK, US or Europe system is provided if you want to save the built-in battery power for later use
• The unit can be simply calibrated in one-point with a mini-screw driver and has a large digital graphic display for maximum efficiency
• Can be mounted on wall or hung when installing the meter
• Brand new and packed with Foam Lined Box
• With 2 YEARS WARRANTY
  

Specifications:

• Range
  PH : 0.00~14.00PH        °C : -50°C~70°C        CF : 0.0~199CF

  EC : 0.00~19.99EC        °F : -58°F~158°F       TDS : 10~19990ppm

• Resolution
  PH : 0.01PH       °C : 0.1°C       TDS : 10ppm

  EC : 0.01EC       °F : 0.2°F        CF : 0.1CF

• Accuracy
  PH : ±0.1PH        °C : 1.0°C       EC, CF, TDS : ±2% F.S.
•  Operating Temperature : 0°C~50°C
•  Automatic Temperature Compensation (ATC) : 0°C~50
•  AC Power Adaptor (for UK, US, Australia or Europe)
•  Dimensions: 155 x 86 x 22mm
•  Weight: 223g
  

Accessories:

INCLUDED:
* BUILT-IN RECHARGEABLE BATTERY
* FREE pH6.864 and pH4.003 CALIBRATION SOLUTIONS
* BNC type Replaceable pH Electrode
* AC Power Adaptor
* (choose one from the available adaptors: UK, US, Australia or Europe)
* Mini-Screw Driver
* User's Manual

OPTIONAL:
* Extra pH Electrode (not included in the set)

Operating Information:

• If it will be used for the first time, the meter has to be charged first. After plugging in the AC adaptor to the meter, press ON/OFF button to turn device ON. Charge the built-in rechargeable battery for two hours before you start using PHT-026.
• Remove the PH electrode's protective cap and connect the PH electrode to the pH electrode input terminal which can be found on the leftmost part of the unit.
• Turn the meter on by pressing the "ON/OFF" switch.
• Immerse the two electrode in the solution to be tested. Stir gently and wait for the reading to stabilize.
• Press the "°C/°F" switch when choosing between °C or °F. And press the "MODE" switch when choosing EC, CF, or PPM to show precise measurement respectively.
• After using, turn off the meter. Rinse the electrode with distilled water to minimize contamination. Put back protective cap on to pH electrode.
  
  
  CALIBRATION SETTINGS:
  • PH Calibration
    • Immerse the electrode in PH 6.86 standard buffer solution, and gently shake it.
    • Allow the reading to stabilize. Use the mini-screw driver to tun then PH 7 calibration knob until the displays show "6.86". Rinse the electrode with distilled water, and wipe it with filter-paper.
    • Immerse the electrode in pH4.01 pr pH9.18 standard buffer solution until "4.01" or "9.18" appears.
      
      
  • EC, CF, ppm calibration
  • Press the "MODE" switch, choose EC for operating. Immerse the meter in 12880µ s/cm (12.88EC) calibration solution.
  • Allow the reading to stabilize. Use mini-screw driver turn the CAL Calibration knob until "12.88EC" appears. Rinse the electrode with distilled water, and wipe it with filter-paper.
    
  • Immerse the meter in "1413µ s/cm (1.41EC)" calibration solution until "1413(1.41EC)" shows.
    
    
  • The instrument's pH range must be re-calibrated whenever:
  • The electrode has not been in used or has been in the storage for 4 or 5 months from the last calibration
  • the electrode has been in used very often in a day
  • the electrode has been replaced
  • the utmost accuracy is required