7 Liter Cooler/Warmer Box

Electronic Cooler & Warmer operated by thermoelectric element widely used in a Car, Boat, Office, Hotel and Camping. The charge-over from cooling to heating by means of a sliding switch.

SAFETY WARNINGS! AND PRECAUTIONS

The ‘warm’ setting for this product doesnot reach a temperature that will safely warm food for periods of more than onehour.

Food stored using the ‘warm’ setting mustbe consumed within one hour, otherwiseshould be discarded.

Failure to comply with this safety warningfor the ‘warm’ setting may result in severeillness.

Repairs to the power cord must only be carried out by a qualified Technician.

DO NOT immerse the unit in water, or allowIt to become exposed to rain or dampenvironments.

DO NOT use the accessories supplied withthis unit with any other appliance.

DO NOT obstruct or block the air intakes atthe back of the unit at any time. A minimumof 10cm of free space should be allowed for Proper ventilation.

DO NOT operate the unit in direct sunlight. Disconnect, and empty if not used for long periods of time.

DO NOT overload the unit.
Cleaning and maintenance can be done with soft damp cloth. To remove stains, add a mild soap to the damp cloth.

When used in the car, users are strongly advised to turn off and disconnect the unit when the engine is turned off (otherwise the Unit can severely drain the vehicles battery).

This device is not intended to be used continuously. Avoid using the unit for more than 10 hours, and give the unit a rest period of around 1 to 2 hours between long stretches of use.

SETTING UP AND USING THE UNIT

Unpack and clean the interior of the unit with a softdamp cloth.
Make sure the “COOL/OFF/WARM” select switch is set to “OFF”Position.

Connect the power cable to the unit power socket and plug it into

The appropriate power source:

A) When using the unit around the house, plug the AC adapter.

(A) into a standard I I0V AC wall outlet.

B) When using the unit in the car, plug the 12-volt DC car adapter

(B) into the cigarette lighter socket.

Switch the “COOL/OFF/WARM” select switch to the desired setting

To operate the unit. The corresponding LED indicator light will indicate

That the unit is warming/cooling.

NOTE: The switch should be placed in the “OFF” position for at least 5 minutes

Before changing the working mode. Remember to turn off the unit and empty

The contents when not in use.

COOL- mode will maintain a temperature of approximately 41’F but may vary

If the outside temperature is above 77’F

WARM - mode will maintain a temperature of approximately 150’F but may

Vary if the outside temperature is below 40’F

Internal dimensions approximately: 8 1/8 (W) x 6 ¼ “(D) x 13 3/8” (H)

Return Policy: All items are returnable ONLY 7 days after customer has received item(s). All item(s) must be returned in the same condition as received. Customer is responsible for all freight when returning item(s). When Eaton Compressor receives the returned item(s), purchaser will be reimbursed for the unit cost, not freight. Anything after 7 days, customer cannot return to seller.

New