Lottes Roofing

PO Box 4473

Sedona, AZ 86340-4473

We work with over 100 distribution centers in 27 states. We will work with you to give you the best deal on your EPDM, TPO, Modifed Bitumen, Roof Coatings, Insulation and Roof accessory items!! Call or Email us TODAY!!!

Click Here to see our National Map of Distribution Centers

"Over 30 years experience in single ply flat roofing products!"

Click Below for Certification, Qualification and Reference Data

Click Here for Lottes Roofing Information

1-888-696-3829

This 7' x 20' 45 Mil EPDM black rubber roofing  weighing 39 lbs is

$100.00

 DELIVERED IN THE| 48 STATES

We have  both  EPDM solvent bonding adhesive in 5 gal pails only, and latex bonding adhesive in 4  1/4 gal pails only that IS REQUIRED to adhere the EPDM rubber to the roofing insulation or substrate. These  bonding adhesives have coverages of about 300-350 square feet both surfaces for the solvent bonding and ONE SURFACE WET APPLIED LAMINATE on the Latex  bonding adhesive. Each pail of material will cover about 300-350 square feet of finished roof area.

For this roofing sheet you will need  1 pail of bonding adhesive which you can purchase under our eBay store catagory of BONDING ADHESIVE listed in our store items or you may click on the link below.

 When buying EPDM rubber roofing you also need to purchase the proper accessories from us to insure a proper and complete roof installation. We have listed all our EPDM accessories in our EBay store.

 200 page Specification & Installation guideline online manual available at

http://www.lottesroofing.com/specs.html

Roof Installation Videos

Click Here to View Installation Video of Black Fully Adhered EPDM Roofing Sheet Click Here to View Installation Video of 3" to 3" Rubber Seaming Tape Click Here to View Installation Video of EPDM Pipe Flashing Click Here to View Installation Video of Unit and Curb Flashing Click Here to View Installation Video of White Fully Adhered  EPDM and TPO Roofing Sheet Click Here to View Installation Video of Mechanically attached EPDM and Seaming Process

Our Technicians can design and determine what you need for your roofing project and give you a complete estimate for your materials as well as instruct you about your installation process!!

We have both WHITE and BLACK EPDM rubber roofing. 

 
EPDM is extremely flexible, much like a tire innertube, and extremely strong. EPDM has over 350% elongation, and it's performance characteristics are stable in temperature ranges from -50 to 240 degrees Farenheit before failure. The EPDM membrane also exhibits over 1,300 lbs psi tensile strength, and 150 psi tear strength. Though there are other types of roofing membrane material in the marketplace today, none of them meet all the positive characteristics, ease of handling, and price of EPDM.

 

FORMULATION	COLOR	SPECIAL APPROVALS
ANJ45B & ANJ60B MIL EPDM	BLACK	UL CLASS A FM CLASS 1
ANJ60W 60 MIL EPDM	WHITE	UL CLASS A FM CLASS 1
PHYSICAL PROPERTIES	ASTM TEST METHOD	RESULTS
WIDTH, INCHES	D751	-0 / +2.0
LENGTH, INCHES	D751	-0 / +6.0
THICKNESS, INCHES	D751	+10%
TENSIL STRENGTH, MIN PSI	D412    D1E C	1305
ELONGATION, ULTIMATE MIN. %	D412	300
TEAR RESISTANCE, MIN., LBS./INCH	D624    DIE C	150
LINEAR DIMENSIONAL CHANGE,  MAX.. % (168 HOURS AT 2400 DEGREES F)	D1204	+2
BRITTLENESS POINT AT -49 DEGREES F	D2137	DOES NOT BREAK
OZONE RESISTANCE (168 HOURS / 100 PPHM/1040 F/400 C/505 EXT.)	D1149	NO CRACKS AT 7X MAGNIFICATION
WATER ABSORBSION, MAX. % (168 HOURS AT 15 DEGREES F/70 C)	D471	+8 / -2.0
HEAT AGING (28 DAYS AT 240 DEGREES F)
PIN HOLES	NO HOLES, COMETS, OR FISH EYES MORE  THAN 1/3 DEPTH OF TOTAL THICKNESS
SEAMS	2" MIN. OVERLAP
SEAM PEEL STRENGTH 2 INCH / MIN. CROSSHEAD SPEED	15 PLI MIN.
SEAM SHEAR STRENGTH 2 INCH / MIN. CROSSHEAD SPEED	(BREAK MUST BE MEMBRANE NOT SEAM 30 PLI MIN.)