|
|
|
-
Manufacturer: AB DICK
-
Model: 9870
- Black Townsend
Swing-Away T-Head
- Crestline
Continous Dampening On Main Unit
- 'PRO' Roller System
(add'l rollers)
- Airtech Powdair
3
- Nearly New Rollers Installed
- Serial
Number: 59138
- Condition: Looks Great! Used in a vocational training program at a federal prison. This press is extremely clean and has lots of extras!
- ALSO INCLUDES:
- Various adjustment handles
- Air Pump
- Various other parts and accessories
---
|
|
- AB DICK 9870 2-Color Offset Delivers
Greater Control and Convenience. The AB DICK 9870 2-color press is
designed with easy operation in mind. With the ability to use polyester
or metal plates and print full-bleed 11x17", it handles a wide range
of small-lot jobs with superb efficiency.
- TOWNSEND Swing-Away 2nd Color Head: This
turns any single color press into a 2-Color press, doubling your production
ability on multi-color jobs! Features
/ Benefits outlined below. *New
Cost: $12,500*
- Crestline Continuous Dampening: Obviously
an amazing dampening system. Features / benefits outlined below. *New Cost: $3250*
- Airtech
POWDAIR 3: This is Powdair's top of the line powder spray
unit. Features / Benefits outlined below. *New
Cost: $2100*
- Operator-friendly operation increases
efficiency. The convenient control panel comes equipped with
a preset repeat counter, double sheet detector switch and a blanket
jam detector switch. Additional important indicators and switches
are also located on the panel.
- Electronic Impression on/off detects the
presence of paper in the infeed section and turns on the impression
cylinder without contacting the paper. This highly reliable electronic
sensor system ensures stable paper feeding regardless of the thickness
of the stock.
- Inverter Motor Control permits smooth transitions
over the range of various motor speeds from low to high.
- AB DICK 9870 Printing
Press:
- Easy to operate, convenient controls
and panels
- Vertical image micro-adjustment device
- Electronic impression ON/OFF device
- Preset repeat counter (5-digit)
- Total counter (5-digit)
- Paper jam detectors (blanket cylinder & delivery)
- Automatic ink ductor on/off control
device
- Crank handle vertical paper guide
- Diagonal image adjustment device (on
plate clamp)
- Delivery table dolly lower limit switch
- Delivery air blower
- Safety covers
- Ink roller cleanup attachment
- Work lamp
---
- TOWNSEND T-51 2nd
Color Head:
- With the T-51 you can produce two-color
work, with precise register, with one pass through the press.
There is no need to wait for the first color to dry before running
the second one. There is no second-color register waste & two-color
production is nearly doubled!
- Four-color processes can be produced
in just two passes!
- You can print single-color on your
offset press by simply disengaging the T-51. The T-51 one can
then standby until your next run.
- If that isn't satisfying, you can print
single-color with the T-51!
- Takes up no more floor space than your
offset press.
- Applications include: business cards,
letterheads, envelopes, two-color thermography, duo-tones and/or
all your two-color & four color work.
- Uses all the same inks, fountain solutions,
plates & other printing supplies as your current press.
- Operating controls are similiar to
your current press to reduce operator training time.
- Greater operating economy & efficiency
plus increased versatility.
- Townsend innovation & dependability.
---
- Crestline Continuous Dampener:
- The Crestline is a completely automatic
dampening system.
- The Crestline delivers a carefully metered,
thinner film of dampening solution to the plate.
- This film is AUTOMATICALLY adjusted and
only the ink keys need be adjusted to maintain denser solids and
sharper halftones.
- AirTech
Powdair 3 Dryer:
- Impression
triggered compressor shut off.
- Anti-static
spray bar design
- Adjustable
powder concentration.
- Auto
speed sensing automatically adjusts
- Test
mode to set powder concentration.
- Spray
to changes in press speed.
- Pulsed
spray timed to sheet.
- Air
blow down for improved sheet delivery.
---
|
 |
- Maximum Paper Size: 13.39" x 17.72" (340
x 450 mm)
- Minimum Paper Size: 3.54" x 5.12" (90
x 130 mm)
- Maximum Printing Area: 13" x 17.24" (330
x 438 mm)
- Paper Thickness: 0.0016" ~ 0.012" (0.04
~ 0.3 mm)
- Printing Speed: 3,000 ~ 10,000 iph
- Maximum Plate Size: 13.19" x 19.37" (335
x 492 mm)
- Metal Plate Type: Pin bar / straight
edge; 25 holes, 0.5" (12.7 mm) pitch
- Feeding System: Universal feeder
- Feeder Pile Capacity: 17.72" (450
mm)
- Delivery Pile Capacity: 20.47" (520
mm)
- Number of Rollers
- Ink rollers: 10 (2 form rollers)
- Water rollers: 5
(1 form roller)
- Gripper Margin: 0.315" (8mm)
- Vertical Image Adj.: ±0.787" (±20
mm)
- Electrical:
- Single phase
- 230V
- 50/60Hz
- 10.0 Amps
- Power Consumption: 1.2kW
- Dimensions:
- Length: 57"
- Width: 37"
- Height: 57"
- Weight: 1,150 lbs.
|
|
Track up to 10 items on this computer in 
)
)
