ADHESIVE GLUE AANRAKU BAILS EPOXY INDUSTRIAL STRENGTH

              

 

                       

Wandac® 5 Minutes AB Glue™

NEW - 20g/blister (total 40g)

 

* Super Strong, Transparent, Fast curing (only in 5 minutes)
* High bonding strength after initial curing
* Very high bonding strength after 24hours
* Can be used to bond most substrates, such as metal, stone, wood, plastic, ceramic, glass, marble...
* Can be used for oily surfaces
* It's ok to estimate the 1:1 AB volume by simply eyeballing.

How to use:
1. Puncture the seal with the reverse side of the tube cap.
2. Clean the surfaces to be bonded; and make sure the surface is dry and free of dirt.
3. Squeeze about equal volume of "A" and "B" from each tube; and mix the two component thoroughly by the mixing ratio about 1:1 (by volume).
4. Apply the mixed adhesive to the surfaces to be bonded, and put the surfaces together and press.
5. The mixed glue will cure in 5 minutes (under 23°C/73°F). Once the glue cures initially, you will get about 70% of its full bonding strength.

Additional Information

Apprearance	Part A: light-green Viscous Liquid; Part B: light-pink Viscous Liquid
Initial Curing Time	Less than 5.0 minutes
Full Curing Time	24 hours
Sheer Strength (mPa)	≥20.0
Tensile Strength (MPa)	≥15.0
Package Size	20 g/blister (0.7 oz/blister)
Viscosity (mPa.s)	Part A: 4.0 ~ 6.0; Part B: 8.0 ~ 10.0

 

Check www.wandac.com for product details.

 

We have confidence in this product; that's why we also offer you hassle-free 100% money back guarantee! I.e. if you're not happy with the product for any reason within 30 days, we offer you full money back, as long as there is still 50% product left.

 

Please check all our other adhesive products by click here Ebay Store