Align TREX T-rex 600e RTF package DX7 GY401 600 cf 6s

Up for auction is an Align Trex 600 (600e) that is completely ready to fly. It's in overall wonderful condition. It's equipped with a Spektrum AR7000 RX, Futaba GY401 gyro, Futaba S9252 servos on the swash and S9254 on the tail, a "torque tube" tail, Curtis Youngblood carbon fiber main blades, a pitch gauge, lots of extra parts, documentation, etc (see photos).  It comes with the external BEC and 7.4v lipo battery as well as a 6s  5000mah Air Thunder battery pack (around $300 for the battery alone if I remember correctly).  All you will need to go and fly this heli is some set up time (it's set up now but will be partially disassembled if shipped) and you lipo charger.  If you pick it up locally, you wont even need the setup time, just go fly.  In addition if you pick the heli up locally (zip code 35801) I will include a lipo charger for the main/BEC packs.  The canopy is in very good but not perfect condition and the canopy mounts are the upgraded screw on type.  It also comes with Curtis Youngblood flybar paddles which are not installed, an Align blade balancer and some misc parts (as seen in pictures).  This item is NOT a toy.  It's huge and with the giant carbon blades and high head speeds it could be VERY harmful.  Please take this into consideration and only fly it at a heli field or some other SAFE place under trained supervision.  I never crashed this heli, only lifted it off the ground 3 to 4 times myself and it was just too intimidating for me.  This heli requires an experienced pilot or one who is willing to learn with someone who is before flying it alone. 

SHIPPING:  I will ship for FREE to the lower 48 in the US only.  No exceptions.  The heli will be partially disassembled for shipping (the tail and head removed) unless you wish to pay $50 in addition to the agreed sales price, in which case I will ship the item in one large box.  I can also deliver it within 150 miles of 35801 for a reasonable fee.  If you want me to deliver it, please email me and work out those details BEFORE you bid. 

NOTE:  I've included pictures of the 600 next to a Trex 450 for size reference only, it is not included as part of the auction price. 




To control this beast I'm including a DX7 which is set up for basic flight/hovering. It comes with a neck strap, rechargeable battery and the wall charger. The manufacture's details for the DX7 below:

Features
20-model memory
Airplane and Heli software
Switch assignment
P-mixes
3-axis dual rate and expo
3-position flap (Airplane)
5-point throttle curve (Heli)
3 flight modes plus hold (Heli)
Gyro programming (Heli)
CCPM, 2-servo 90 degree, 3-servo 90 degree and 3-servo 120 degree
Configured to default to airplane model type (all heli programming is available)

Overview
With the DX7 you’ll be able to fly anything from micro electric helis, to big gas-powered IMAC planes without regard to frequencies and free from fear of interference. Calling this kind of thing “revolutionary” just doesn’t cut it. It is nothing less than a quantum leap in RC technology that will change how you fly forever. Never again will the availability of a frequency pin dictate when you can take off. Never again will you have to ask, “What channel are you on?” Never again will your flying experience be interrupted by model-generated RF noise, interference from commercial broadcast towers, or anyone on another RC system.
The big difference with DSM2 is that it not only flies any size model with absolute precision and complete freedom from interference, but it also processes its signal faster than any high-end 72MHz PCM system.

DSM2—Security and Speed:
Unlike most first-of-its-kind innovations, DSM2™ is not an unproven concept. It is based on the same Spektrum 2.4GHz DSM (Digital Spectrum Modulation) that RC car racers, as well as micro electric and parkflyer modelers, have been enjoying for at least two years. Like DSM, DSM2 provides an impenetrable radio link that’s immune to every known type of RC interference. Because it operates at 1024-bit resolution, it provides the kind of locked-in response that will have pilots feeling more connected to their models than ever before.

AR7000—Spectacular Signal Clarity: The AR7000 dual receiver that comes with the DX7 is key to the system’s incredibly robust RF link. Comprised of a compact main receiver that is linked to an even smaller satellite receiver by a 6-inch lead, the AR7000 acts as a pair of extremely sharp RF eyes that each take in a slightly different view of the signal environment. Information from both receivers is then processed by patent pending Spektrum software that takes information from each receiver and combines it to form the most vivid picture of an RF signal than has ever been possible before. What’s more, there are no long antennas to accommodate. The AR7000’s short 3-inch antennas don’t require any external exposure, so installation is an absolute breeze.

ServoSync and ModelMatch—Extra Safety and Precision:
DSM2 and the AR7000 aren’t the DX7’s only marvels. Spektrum engineers have come up with two more patent pending innovations that you’ll wonder how you ever lived without—ModelMatch™ and ServoSync™. ServoSync is an ingenious new feature that actually resequences the bits of data the DX7 transmits based on the type of mixing you select. So, if you have a dual elevator on your big Extra or a 3-servo CCPM setup on your heli, ServoSync will see to it that those servos working together receive their impulses together. The result is more synchronized servo movement that translates into an undeniable, locked-in feel when you fly. ModelMatch puts an end to wrong model syndrome. Almost everyone who flies RC has at one time or another crashed because of neglecting to verify the model name on the transmitter display during preflight check. A unique code is embedded in the DX7’s signal so that, if the wrong model’s name is on the screen, the model’s controls simply won’t respond.

AR6000-Compatible: DX6 owners and anyone else who flies small electric models will be pleased to know that the AR6000 receiver works perfectly with the DX7, too. In fact, the AR6000 will actually benefit from the DX7’s signal speed advantages, as well as ModelMatch and ServoSync. So whatever the aircraft, be it a .60-size heli or a 15-ounce foamie, it can fly with the DX7.



Check out my other items!

Be sure to add me to your favorites list!