This Auction is for two Custom 14"H x 18"W  Window Decals For Car, Truck, Van or SUV  Measure Your Window For Correct Size. All Sizes Available. These Decals can be placed on windows, doors or any smooth surface.

Material:

These Graphics are Oracal Vinyl Decals for exterior use. They have a 7+ year life and will not peel or fade. They come to you RDA (Ready to apply).  They are one color and custom cut - your vehicle is the background. Additional colors are available. Check our store or email us if you need vinyl graphics with 2 or more colors.

Vinyl Color Options:

(After Purchase, please include color choice with Text information).

Ordering Information:

After your purchase, please send us the information for your vehicle graphics. (Text and Color Choice) We will do a layout and send it to you via email for approval or changes.

*If you have an exsiting logo and would like to include it, please email it to us first at ebay@AttentionGrabbersSigns.com, and we will let you know if additional charges apply to recreate it.

*If you do not have a logo, but would like to include one, we can create a logo or graphic for your decals for a minimal charge. Email us for details. .

Once we have the exact design that you want for your graphics, we place them into production and then ship.

Maximum Size with this Auction is 14” x 24”.

Smaller or Larger Sizes Are Available In Our Store.

About Us:

Attention Grabbers Signs and Vehicle Graphics is a Sign Shop in NE Indiana. We have over 22 years experience in sign design and manufacturing. A large part of our business is repeat customers.  Our business is aimed at business’ who are looking for professional signs with an “Attention Grabbing” effect at affordable prices.

Shipping:

Winner pays $7.50 shipping. Item will be shipped USPS priority mail. We combine shipping. $3.50 for each additional order. Item is usually Shipped within 3-5 days of approved layout.

Payment:

We accept PayPal Payments Only.

Below is information and instructions for applying your decals.

Your vinyl decal will arrive rolled up sandwiched between two sheets: transfer tape and waxed backing paper. The top tacky sheet is the transfer tape, which is a low tack sheet used to lift and hold your graphic in one piece. The vinyl’s pressure sensitive adhesive is stronger than the transfer tape’s adhesive, allowing your graphic to bond tightly to your application surface as you remove the application tape. The backing paper is waxed on the vinyl’s adhesive side and paper on the backside, making situating the graphic possible without bonding the graphic before it is in place.

We suggest the following items for your installation:

 Squeegee · Spay bottle with water and a few drops of dish soap

 Tape measure · Masking tape · Scissors

Clean - Clean - Clean

I cannot stress enough how important it is that the application surface be free of all dirt and wax. Clean your surfaces thoroughly!  With the backing paper still attached, position the graphic where you want it applied. Stick a piece of masking tape on the upper corners of your graphic anchoring it in place. Since the backing paper is still on your graphic, you can move it around and make your positioning adjustments now. Use a tape measure to make sure it is level, never trust ‘your eye’.

Once you are happy with the positioning, lay a line of masking tape along the top edge of your graphic, making sure you have good masking tape contact with the graphic and the application area. If your masking tape should come loose while you are lifting the backing paper, slowly and calmly replace the backing paper to the graphic, reposition the graphic and add another line of masking tape to your existing top line.

Raise the now secure graphic ‘sandwich’ and clean the area one more time. This assures that the backing paper did not leave any dust particles or static which can cause bubbles. Slowly remove the backing paper from the vinyl graphic and application tape. At this point, if you prefer a wet application, you can lightly mist the application surface with water. This slows down the vinyl’s adhesive bonding process, giving you time to correct any imperfections. (If necessary, keep the area wet until you are happy with it.) Carefully lower your graphic to the surface, using the squeegee to remove any trapped water and air bubbles. Use moderate to firm pressure with your squeegee to adhere the pressure sensitive vinyl properly.

If you used the wet method, allow time for your vinyl adhesive to dry and produce a secure bond before going to the next step.

Small air and water bubbles should evaporate within a few days.

Pop any larger bubbles with a pin and press out.

View our Gallery Below.