BOOSTER PUMP/ TRANSFORMER AQUATEC 8800 REVERSE OSMOSIS

The 8800 Series is intended for membranes rated up to 120 GPD. It can be mounted in
several positions with out entrapping air, including pump head down and pump head up. Close
tolerances within the pump head and motor, result in lower amp draw; lower operating temperatures;
smoother running; longer life; lower maintenance; and greater efficiencies.
The pump incorporates powder coated die cast alloys and a unique label sealing process
to reduce exposure to moisture which is the major cause of motor failure. The pump is available with optional EMI/RFI electronic noise suppression to reduce TV reception interference.
It is capable of operating in a warm, humid, hostile environment where other pumps have
been known to fail. It is the toughest, most durable pump available on the market today.

Distinguishing Features:
• Toughest, most durable pump on the market
• Adjustable max. outlet psi.(regardless of feed pressure)
• Expels trapped air (no more air locks)
• Can be mounted with pump head up or down
• More flow at extremely low inlet pressures
• New motor venting system to remove moisture
• EMI/RFI electronic noise suppression
• 100% final performance tested

Key Operational Benefits:
• Boosts pressure 40 to 120 psi (adjustable)
• Used with membranes 50 to 100 GPD
• 15,000+ operating hours (estimated)
• Quiet –– less than 52 DBA
• Can run dry without damage

Technical Specifications:
OPERATION: The 8800 is designed to operate with a PSW tank shut-off switch for hydropneumatic storage systems. The PSW, when used with a typical under counter R.O. system, can be augmented with an ESO, Electronic Shut-off Valve. It is also compatible with
most hydraulic shut-off valves. For counter-top systems, Aquatec's TLC, Tank Level
Controllers, shut off feed water and the pump when the product water storage tank is full.
The AFR, Auto Flush Valve, is highly recommended for higher production membranes to
ensure membrane efficiency.

POWER: Pumps operate with safe, low energy (only 24 watts), low voltage (12-24 volt)
motors, powered with compatible transformers with world wide primary voltages available
(100 VAC, 120 VAC, 230 VAC). Transformers are optional and must be ordered in addition
to the pump.

FITTINGS: Built-in 1/4" John Guest half cartridge fittings eliminate need for external fittings.
INSTALLATION: The location and positioning of the pump may affect it's performance.
Always consult Purely H2O for recommendations that will optimize your system.
• Self-priming –– 60" lift
• Low voltage (12-24V) for maximum safety
• Corrosion resistant exterior
• Continuous or intermittent operation

Your Purchase includes one Aquatec 8800 booster Pump and one transformer....Yes The transformer is included in this auction :)

Aquatec 8800 Booster pump
Transformer
2 year waranty