Up for auction is a 3 axis SUPERMAX Knee Mill, Anilam 1400M CNC Control 

This mill is equipped with a 3-horse  spindle motor and AC TECH VFD to control spindle speed. Single or 3 phase 220 volt. Yes this drive will run on single phase or 3 phase without a phase converter. All servo motors are heavy duty Anilam.

Box Ways and Table are in great shape. Table is 49 X 9 with 5/8 tee slots. Only a couple miner cuts in the table. Machine has been repainted recently. Very clean! 

 Kwick Switch taper gives this machine much versatility because of availability of inexpensive tooling. No need to reach up as tools are changed right at the spindle.  New  automatic electric lube pump. 

Manual operation is possible using Handles with Display as DRO. The Control Runs on separate 115 Volt Single Phase Power with Standard USA Household Plug. Anilam Crusader 1400M Four Axis CNC Control with Canned Cycles, Cutter Compensation, Circular Interpolation, Peck Drilling Cycles, Mirror Image, Multi-Axis Interpolation, Do Loops, Sub-Routines, etc. RS 232 Port and Floppey drive for Programming Uploads and Downloads. M functions for control of spindle and coolant automatically.

Machine in great shape, everything works. This control has a 4 axis motion board. All it needs is a drive card and a rotary table to add the 4th axis.

Programming manual and VHS training tapes are included.

Come and test drive this machine it is under power. Loading this machine is free. Crating or wrapping on pallet is at buyer's expense. Shipping must be arranged by the buyer.  On a pallet 72"Lx72"Wx84"H 3500 lbs. I will try to help if needed. Get a quote from www.freightquote.com Not responsible for any damage during shipping or transit. Payment must be received within 5 days from close. Cashiers check or Bank Wire transfer only. Funds must clear before shipment.

Sorry no PAYPAL.