Baseball Batting Cage Net & Steel Frame 25x12x11

Parts

QTY

ITEM DESCRIPTION

1

6

Pipe with swedge at one end

2

3

Pipe with swedge at both ends

3

6

Pipe with swedge at one end

4

6

Pipe with swedge at one end and bent at other end

E

6

Bottom of arches side

Corner

6

Upper corners of the arch

Stake

6

Stakes to hold the arches in place

Cables

6

Cable assemblies with small U-bolts turnbuckles

End Ropes

4

Ropes to hold end of frame in place

End Stakes

4

Stakes to tie the end ropes to

Ties

24

Ties to secure the batting cage to the frame

Directions to assemble the Junior Batting Cage and Frame, as per the drawings

1

Assemble the arch legs by attaching Parts #3 to Part #3 to Part #4.

2

Assemble arch horizontal top by attaching Parts #1 to Part #2 to Part #1

3

Attach the corners to the legs (Parts 3-3-4) and to the horizontal top (Part 1-2-1). Make sure that the rings on the corners and the ring on Part #2 are facing the ground when the arch is standing upright.

4

Complete the assembly of the remaining arches

5

Tie two of the End Ropes to the corner rings on both of the two end arches

6

Measure the cable assemblies and made sure they are all the same length. If not, adjust them to be the same length.

7

Attach three of the cable assemblies to the rings between the first arch and the middle arch. Proceed to attach the cables between the middle arch and the other end arch.

8

Have one or two people stand up the first end arch and then insert the End Rope stakes into the ground and tie the end ropes to the stakes so that the arch is vertical.

9

Stand up each sequential arch until all three of the arches are standing. Make sure the cables are taunt and the arch locations are satisfactory to you.

10

Insert the other end stakes and tie down the ropes at the other end of the frame.

11

Move each arch foot a little and insert the stake into the ground and then insert the arch pole end into the stake and tighten the pole in place

12

Do the same to the remaining arch feet

13

Tie the batting cage ties around the top ropes of the net and the netting together, about four feet apart.

14

Lift up one side of the net and attach all the ties to that cable along the entire frame. Then attach the net ties to the middle cable and lastly attach the ties to the final side cable.

15

Pull the end net ropes gently to the frame so that the net ends will not bow inward.

16

Congratulations you are ready to play ball --- Play ball.