Bluetooth Bracelet Wristband W/LCD Display Caller ID

Specification:

1-Primary Function: Bluetooth bracelet with Vibration function and LCD display
2-LCD Display Size: 22mm wide
3-Bluetooth Spec: version: 1.2 - Compatible with V1.1, V1.2 & V2
4-Bluetooth Profiles: supported Headset and Hands free profile
5-Frequency range: 2.4GHz
6-Stand-by time: 60 hours
7-Proximity vibrating alert when mobile is 5 Meters away
8-Can be charged by laptop or home PC via the USB cable provided, or the bundled AC adapter
9-Dimensions: 15mm wide x 65mm (inside diameter)

Features:

1*This Stylish Bracelet solves the problem of having your phone buried in pocket or bag, by giving your wrist a buzz  “vibration”  when anyone calls in.

2* The LCD will Display the caller ID’s s number and you can just press the function button to pick the call or reject while you are too busy to answer.

3* The Bracelet comes with the  “Link Loss Alert Function”, if your mobile phone has gone more than 5 meters apart from you, the bracelet will notify you through vibration. So, you will notice that your phone has dropped in somewhere or may be stolen by someone.

This is the newest Bluetooth Bracelet. It has innovation technology. Up to date designing, classical bracelet appearance. fashion and beauty. (Perfect combination of classic and technology, global original creation)
Stainless Steel belt prevent from allergy and comfortable to feel.
Elegant and clear OLED displays
substantial and wireless connection to cell phone: Bluetooth V2.0
Vibration prompt for incoming phone. Indication of incoming phone NO.
Bracelet controls reject/mute function
Initiatively control incoming phone
SMS/MMS vibration prompt
Break away cell phone prompt , it can send vibration warning to avoid lose or stealing
Automatic pairing, no need to operate repeatedly.
Rapid battery charge function

1. Charging

The Bluetooth bracelet comes with a built in rechargeable battery. Before using the bracelet for the first time please charge the battery fully (Approximately 6 hour charge).

1.2. How to Charge
To charge the bracelet please plug the appropriate end in to the bracelet charge port on the bracelet and the USB end either into a computer or the wall adapter provided.
1.3 Normal Charging Time
The bracelet will normally take 2 hours charge from completely flat. When the battery is fully charged the screen will show “ charge OK”
1.4 Charge Indication
The screen will first show “Charger In”, and then show “Charging”.
1.5 Standby Time
Up to 60 hours standby time, note that the stand by time is effected by how often the bracelet vibrates and screen display.
1.6 Low Battery Notification
When the battery is running low the screen will  show “Low Battery”,When this occurs please charge the bracelet to ensure greater battery life.

2. Turning the Bracelet OFF/ON

To turn the bracelet on hold down the main button for 2 seconds until the screen show “power on”, and will enter the connecting status directly and show “connecting” on the screen.
To turn the bracelet off hold the main button down until the screen show “power off”.

3. Pairing Bracelet with phone

To pair the bracelet with your phone:

Keep bracelet within 1 meter of your phone
 Ensure bracelet is turned off to begin
 Hold the main button down for 4 seconds until the screen show “ Pairing”
Search for the device on your phone, it will come up with the name “Bracelet”
 Press yes to pair the device
 It will then ask for a pass code enter “0000”
 Press yes to connect the device and authorize it
 The screen will show “connected” once the pair success.

Remarks: The screen will first show “Pair Fail”, and then “No Connect” once the pairing failed..

4. Accept/reject a call

While you receiving a call, you can press the button 5 seconds to accept a call and the screen will show “Call accepted”. To reject a call, press the button one second to reject a call and the screen will show “ Call rejected”..

5. Link loss

The screen will first show “ Link Loss” and then show “No connect” and vibrate once the link have been cut.

6. Linking Bracelet with phone

When the bracelet is turned back on, depending on your phone it should re-link automatically

To re-link the bracelet with the phone manually go to the Bluetooth menu on your phone select the bracelet in this list and choose the connect with device option. Ensure that your bracelet is now turned on. You may have to re-enter the pass code.

7. Bracelet Operation

The bracelet will vibrate and show the caller’s ID when you have an incoming call.

8. To Reset Bracelet

You may want to reset the bracelet back to the original factory settings, this function clears all current pairings with bracelet:

Ensure that bracelet is switched off
Connect the power charge cable to the bracelet and charge for a few seconds
The bracelet will now turn off and all parings have been cleared.

9. Safety Guidelines

Do not submerse the bracelet in liquid or expose to a high amount of moisture or humidity
Do not use abrasive cleaning solvents to clean the bracelet
Do not expose the bracelet to extreme temperatures high or low.
Do not stick anything on the inside of the bracelet as this may damage or stop the bracelet from working
Store bracelet in a safe dry place away from extreme temperatures and dust
Do not attempt to replace the bracelet