ButtKicker Power BKA-1000-4A Amplifier USA 120Volts

We are extremely pleased to introduce the newest addition to the ButtKicker family of products - the ButtKicker Power Amplifier. Designed specifically to power the ButtKicker LFE and Concert, the BKA1000-4 is an incredible value, chock full of features designed to make the installation and operation of the ButtKicker easier and more affordable.

The ButtKicker Power Amplifier is available from all ButtKicker distributors, dealers and agents worldwide.

With 1100 watts into 4 ohms and 2100 watts into 2 ohms, the BKA1000-4 is able to power one or two 4 ohm ButtKicker Shakers (when wired in parallel).

Not only does the ButtKicker Amplifier have over 2100 watts of power, it adds low and high cutoff filters at no additional cost.

With the low cutoff in the "on" position frequencies less than 25 Hz are filtered out. This is ideal for musicians who do not need nor want the ButtKicker Shaker to "see" anything below 25 Hz.

When the low cutoff is in the "off" position all frequencies are passed on the ButtKicker - ideal for home theater use and the low frequency response the ButtKicker has become known for.

With the high cutoff in the "on" position, frequencies above 40 to 160 Hz are filtered out - meaning only frequencies below 40 to 160 Hz are passed to the ButtKicker.

The variable high cutoff filter control allows you to set the high cutoff from 40 to 160 Hz.

This is ideal for home theater use when only low frequencies are wanted. Conversely, when used by musicians, leaving the high cutoff switch in the "off" position enables the ButtKicker to respond to all frequencies in its natural working range of 5 - 200 Hz.

 

Specifications
Watts	1100 Watts @ 4 ohms | 2100 Watts @ 2 ohms
High cutoff	40 to 160 H z
Low cutoff	25 H z switchable
Voltage	115v - 120v
Dimensions	12"W x 11"L x 4.375"H
Weight	25 lbs / 11.36 kg