This item has been added to My eBay for Guests. As a guest, you can: Track up to 10 items on this computer in My eBay Receive an email reminder for this item a few hours before it ends
This listing is a Classified Ad. There is no bidding. If you are interested in this item, you may contact the seller to request additional information.
The chassis you choose is literally your car's backbone & we offer one of the finest quality street rod frames in the industry. These frames are fabricated from thick 10 gauge P&O flat plate with all of the necessary body mounting nuts welded INSIDE the frame rails instead of using nut zerks that many of the others use. The flat stock is laser cut to ensure the same exact pieces for every frame.
Once the material is cut; the flat stock is fit on the rail jigs, squared and the TIG welding begins. All welds are then ground and inspected to verify that they have complete penetration and no porosity. The rails are placed into the frame fixture & tack welded to the fixture to eliminate movement while the frame is constructed and finally TIG welded. The ladder bars, shock mounts, and spring hangers (if using buggy spring) are all fitted to the rear-end housing while it is properly located under the "jigged" frame. From start to finish, it normally takes 6 to 7 days to complete.
Our "boxed"perimeter '32 frames all come with the following features:
Boxed 10 gauge plate steel panels fully TIG welded by hand
All rails feature the authentic '32 "Reveal" stamping in outer panels
Plain steel tubular front spreader bar
2" extended inner boxing plates which allow for either a standard 106" wheelbase or 108" extended wheelbase
Model A front cross- member
1-1/4" .120"wall tubular "drop-out" transmission cross member designed for GM TH350/TH400/700R4 & GM 4-Speed transmissions. The cross member assemblies even feature an integral safety loop for the driveshaft at no extra cost!
2"x 1-1/2" rectangular tube rear cross-member designed for either coil-overs or a buggy style transversely mounted spring.
Rails are all “C-Notched” for extra axle clearance at no extra cost
Plain steel tubular rear spreader bar
The frames are available "bobbed" in rear if needed as well at no extra cost.
The rails offer the following features:
Boxed 10 gauge plate steel panels fully TIG welded by hand
All rails feature the authentic '32 "Reveal" stamping in outer panels
2" extended inner boxing plates which allow for either a stadard 106" or 108" extended wheelbase
"C-Notched" for extra axle clearance at no extra cost
The rails are also available "bobbed" in rear if needed as well at no extra cost.
Heres what our standard perimeter frame will look like when it arrives at your local Freight terminal to pick it up.
Here is our brand new "CYCO-FRAME" with the cool beveled holes in the front horn boxing plates, motor mounts and a Vega steering box plate. This cool frame with the three mentioned options runs $2450.00 + shipping.
Model A front crossmember and extended standard inner boxing plates
And here are our "CYCO-Plates" that feature beveled holes for an old-skool cool look! This option costs an additional $195.00, but for the cool factor it is money well spent!
2"x 1-1/2" rectangular tube rear cross-member designed for either coil-overs or a buggy style transversely mounted spring.
WE DO CUSTOM WORK TOO! Look closely; this particular '32 chassis was built using an original 1932 Ford front crossmember & a 1940 Ford rear crossmember (both supplied by the customer). It was built to his specs for a "American Grafitti Coupe" replica car.
The safety loop for the driveshaft protects you and your rider. This is what the standard frame looks like for cars built with the brake master cylinders mounted along the inside drivers side rail in front of the crossmember. We ship the driver's side front support tube so that you can install it if you would like once the master cylinder/booster is installed.
Easy to remove "drop-out" style transmission mount
We offer many options from just '32 rails only all the way up to completed chassis with front & rear axles, wheels and tires & brakes mounted as you see here!.
WE SHIP VIA FEDEX FREIGHT, UPS FREIGHT & ROADWAY FOR MANY REASONS. WE ONLY SHIP TO YOUR LOCAL FREIGHT HUB. WE DO NOT OFFER RESIDENTIAL OR BUSINESS DELIVERIES, WE DO NOT OFFER LIFTGATE SERVICES. WITH FEDEX, UPS & ROADWAY COMBINED WE HAVE MORE THAN A THOUSAND FREIGHT HUB LOCATIONS STRATEGICALLY PLACED THROUGHOUT THE UNITED STATES TO SERVICE YOUR AREA.
SHIPPING IS NORMALLY A FLAT $325.00 TO ANY HUB EAST OF THE MISSISSIPPI.
We also have a dealer pricing program for those of you who are building 32's, 33-34's Willy's or if you have some friends looking for a chassis too!
We also have the following fiberglass body parts available:
Our 1932 Three window "CYCO-COUPE" body with a 3" chopped roof.
Fiberglass fenders & Running boards
One-Piece Tilt front end with either Smooth side panel design or scalloped side panel design
One piece removable hard top for stock '32 roadster bodies
Smooth standard hoods
'32 Grill Shells
Three window dash
Speed Blisters
Please feel free to call us at 330-979-3486 or email us with any other ideas or questions you may have by using the "Email the seller" link or directly at cyclonerods@gmail.com.
For more parts for your build ....... please take a look at our other auctions. We look forward to doing business with you.
Track up to 10 items on this computer in 
)
