—Features soft, responsive buttons and

an easy-to-read backlit Liquid Crystal Display (LCD).

—LCD

shows current room temperature at all times, and

desired temperature prompts upon demand.

—Switches system operation

automatically when both heating and cooling are

needed on the same day. It can be disabled if not

necessary in certain areas of the country.

—Allows a check of

the temperature outside before leaving home. Optional

on all models.

—Tells when it is time to clean

the system’s filter.

—Non-volatile RAM chip requires no

battery backup. Program is retained in memory so

reprogramming is not required after power loss.

—When the cooling system

is operating, the word COOL preceded by a small

triangle is displayed below the cooling set point. When

the heating equipment is operating, the word HEAT

preceded by a small triangle is displayed below the

heating set point. If the equipment turn on is being

delayed, the triangle and the word will flash.

—Seven day

programming, with 4 temperature changes provided per

day, means comfort when the family is at home and

savings through reduced energy usage when the family

is away or asleep.

—Simple instructions are located inside the

thermostat’s door.

—Copy the comfort schedule

from one day to the next using the copy previous day

function.

—Hold function allows the

regular schedule to be by-passed with a temporary

setting.

—Provides consistent heating right on

time as it gradually adjusts indoor temperatures before

a scheduled change.

—Room temperature may

be offset by up to 5°F in either direction to

accommodate end user’s needs.

—This option

prevents auxiliary heat from coming on above a

selected outdoor air temperature when configured as a

heat pump thermostat using the outdoor air sensor.

—Equipment protection.

—Completes your Carrier

comfort system needs.