| • 51 CTCSS Codes |
• Panel can be used as Stand Alone Tone & Code Display of ALL 51 CTCSS,106 DCS & 16 DTMF Codes |
| • 106 DCS Codes |
• Will not False on Adjacent Tones, even those with Reverse Burst |
| • Repeater Enable/Disable |
• Remotely Programmable by DTMF or Local Programming through menu driven RS-232 Port, or with Modem on Landline |
| • Repeater CW ID |
• Pre-Paid Customer Time Blocks |
| • Programmable CW ID per subscriber |
• Remote Enable/Disable of ALL Tones & Codes |
| • CW ID Interval per subscriber |
• DTMF-DTMF Regeneration |
| • CW ID Interval (System) |
• Global User Programming |
| • Anti-Kerchunk Timer |
• Programmable Hang Time (Carrier Delay) per subscriber |
| • Stuck Mic Activity Timer |
• Barge-In Enable/Disable per subscriber |
| • DCS Input Polarity |
• Hog Timer Enable/Disable per subscriber |
| • COR with Polarity Select |
• Regenerated CTCSS Tone or DCS Code Programmable to turn off at the start or end of the Carrier Delay per subscriber |
| • Programming Mode Access Code is programmable |
• Cross Tone, Cross Code Encoding per subscriber |
| • Hog Timer, Hog Idle & Hog Monitor Timers |
• Direct CTCSS Frequency and DCS Code Entry |
| • Programmable Courtesy Tone per subscriber |
• Test Procedure to set all Repeater Levels is built-in |
| • Programmable Reserve Tone |
• Time & Hit Counters Record the time of ALL CTCSS & DCS Tones on the repeater channel |
• Time & Hit Counters Record the time of ALL CTCSS & DCS Tones on the repeater channel |
• Real Time Display shows all Received Tones & Codes as they occur, even if not active in the panel |
| • Regenerated Tone can be the same or different for ALL CTCSS & DCS Codes |
|