SquareTrade © AP6.0Use this tough rubber to make molds and stamps for concrete and cement. It is easy to use and can really make you some money if you are trying to make your own concrete molds or stamps.
This kit makes 2 gallons.
For more information see www.jgreer.com
Properties:
Type: Polyurethane
Mixed Viscosity: Thin liquid
Mix Ratio: 1 :1 by volume
Pot Life, minutes @ 77ºF: 5
Cure time, hours @77ºF: 12
Tensile strength: 750psi
Color: Black
Shrinkage: negligible
Durometer: 75 shore A
How to use:
Thoroughly mix parts “A” (black) and “B” (clear) until a consistent black color is achieved. Pour within 5 minutes. A mold release must be used when pouring this product against another surface. AeroMarine Release #7 is the standard release for this product, and is supplied with this kit. It is a soft paste, and may be thinned with alcohol or naptha.
To release the concrete easily from the mold, many customers use motor oil or castor oil.
This is also an excellent choice for making pedals, motor mounts, or door trim rubber for automobiles. Call John Greer at (877)342-8860 for advice on how to make a mold for these items.
On Dec-23-05 at 17:35:08 PST, seller added the following information:This kit consists of one gallon each of part A and part B, making a total of two gallons.
Track up to 10 items on this computer in 
)
