Crown XTi 2000 amplifier B STOCK XTi2000 amp XT i

NEW Crown XTi 2000

Power Amplifier

Manufacturer B STOCK

This sale is for a B STOCK, Crown XTi 2000 audio power amplifier. We are authorized Crown dealers, so these amps carry the full 3yr Crown factory warranty. The XTi lineup is the perfect audio solution for those who require good, clean, no-frills power at a great price. Backed by Crown's unmatched service and support, the XTi line is an excellent value. This amp is in stock to ship out ASAP. Own this essential audio tool today at a great eBay price. Please feel free to email us with any questions. (brian@bigtimefans.com) or 414-339-0557

What is "B" stock?

A "B" stock unit may have a cosmetic mark or blemish, either from customer return or manufacturing. This amplifier has been tested and certified to perform to the same specs as any new unit. This performance guarantee is backed up by the same full warranty as any new perfect stock item

Why risk losing out on the best warranty coverage in the business?

Crown has the best "No Fault" warranty in the business, and it is a very valuable part of any new amp purchase. If another seller tells you that your ebay check out or paypal invoice is all you need they are not telling the whole truth. Crown requires an invoice clearly identifying the dealer from whom you purchased the amp to validate the warranty. If the paypal invoice or ebay info shows a verifiable dealer name and address it is OK. If all they will give you is an ebay handle like "worldofcheapstuff" or "zippysgear" without an address or any contact info your warranty coverage is in serious jeopardy.

Why risk it when you can get the same low price from us? We are authorized full line Crown dealers (Big Time Audio / proaudiomart.com, call 1- 800-342-6939 to verify), so this amplifier will carry the FULL 3 YEAR FACTORY WARRANTY starting on your date of purchase. Buy with confidence from an authorized dealer today at a great ebay price. Please feel free to contact us with any questions: brian@bigtimefans.com or 1-414-339-0557

Crown "No Fault" Warranty Guarantee:

Unlike other manufacturer’s limited warranties, Crown guarantees that your new amplifier will meet or exceed original specifications for a full three years of ownership. During this time, if your amplifier fails, for any reason, it will be repaired or replaced at our expense. This includes parts, labor and round-trip (ground transportation) shipping, even a shipping carton should you need one.

We will combine shipping on multi-auction purchases to save you money. Just drop us an e-mail (brian@bigtimefans.com) and we'll be happy to give you a revised shipping total.

This is a B STOCK amplifier purchased from an authorized, full-line Crown dealer. If you have any other questions, or would like more information, just drop me an e-mail. brian@bigtimefans.com Thanks and happy bidding. Please see my other auctions and ebay store for more pro audio related items.

INSTRUCTIONS FOR INTERNATIONAL BIDDERS
Shipping for international bidders will be determined at auction close, and will be at actual rates. All items will be insured for the winning bid price, and this will be included in the shipping quote.

Payments can be made by direct bank transfer (SWIFT or ABA number). Paypal is also OK as long as your account is verified, and we must ship to your confirmed address. Other money transfer methods are available, so please contact us for details. Winning international bidders will be responsible for all customs, duties and fees required in your country. We are registered as commercial shippers, so customs regulations do not allow us to declare items as a gift. This amp has a worldwide power supply, and it will operate on 100-240V 50/60Hz without internal modifications.

The following is a description and specs from Crown:

XTi Series

The XTi Series of Crown amplifiers are professional tools designed and built for portable PA applications. The series includes three models which are identical except for output power: XTi 1000, 2000 and 4000. All are rugged and lightweight, and offer unmatched value in their class.

XTi-Series amplifiers feature an LCD screen with DSP speaker presets for crossover frequencies, EQ, limiting, delay, and a subharmonic synthesizer. Other features include a switch-mode universal power supply, useful function indicators, proportional-speed fan assisted cooling, XLR inputs, Speakon® and binding-post outputs, short-circuit protection and more.

With their powerful, reliable performance, XTi-Series amps easily handle 2-ohm loads and are capable of chest-thumping lows. Plus, your investment in an XTi-Series amplifier is backed by Crown’s Three-Year, No-Fault, Fully Transferable Warranty.

Features

Integrated proprietary DSP with LCD front panel display
Accurate, uncolored sound with very low distortion for the best in music and voice reproduction
Advanced protection circuitry guards against: shorted outputs, open circuits, DC, mismatched loads, general overheating, high-frequency overloads and internal faults
Extremely versatile, handling a wide range of speaker impedances and outputs
Switch-mode universal power supply
Speaker presets for crossover frequencies, EQ, limiting, and delay
All products fill 2U rack spaces and weigh under 17 pounds; weight sets a new standard in lightweight amps (20% less)
Speakon® and binding post outputs, XLR inputs and loop-thrus
Comprehensive LED status per channel
Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications

Specifications

Power Output (1 kHz)
	Stereo			Bridge-Mono
	8 Ohm	4 Ohm	2 Ohm	8 Ohm	4 Ohm
XTi 4000	650W	1200W	1600W*	2400W	3200W*
XTi 2000	475W	800W	1000W*	1600W	2000W*
XTi 1000	275W	500W	700W*	1000W	1400W*
*With 1% THD.

Voltage Gain at 1kHz, 8 ohm rated output:

XTi 1000: 30.5 dB
XTi 2000: 32.9 dB
XTi 4000: 34.2 dB

Frequency Response: ±0.25 dB from 20 Hz to 20 kHz at 1 watt into 4 ohms.

Phase Response (at 1 watt, 20 Hz to 20 kHz): ±15°.

Load Impedance: Safe with all types of loads. Rated for 2 to 8 ohms in Stereo mode, 4 to 16 ohms in Bridge-Mono mode.

Sensitivity: 1.4V

Signal to Noise Ratio (below rated 1 kHz power at 8 ohms):
105 dB (A weighted).

Damping Factor: Better than 500 from 20 Hz to 500 Hz.

Crosstalk: > 80 dB below rated power, 20 Hz to 1 kHz.

Common Mode Rejection (CMR): > 45 dB from 20 Hz to 1 kHz.
Input Stage: Input is electronically balanced and employs precision 1% resistors.

Input Impedance (nominal): 20 k ohms, balanced;10 k ohms, unbalanced.

Maximum Input Signal: +22 dBu typical.

AC Line Voltage and Frequency Configurations Available: 100V, 120V, 220-240V
50/60 Hz.

AC Line Current:

XTi 1000: 6.5A
XTi 2000: 6.9A
XTi 4000: 8.0A

At Idle: Draws no more than 90 watts.

Operating Temperature: 0° C to 40° C at 95% relative humidity (non-condensing).

DSP Section

EQ: 4-band paragraphic per channel, boost/cut ±12 dB. Also adjustable high and low shelving filters.

Filters: Highpass and lowpass per channel. Butterworth 6/12/18/24 dB per octave. High and low shelving filters, one per channel.

Delay: For signal alignment of driver; 5 mS total delay.

Subharmonic Synthesizer: Adds low-frequency content.

Output Limiter: Prevents clipping.

Presets: 10 user speaker presets.

Front Panel Controls and Indicators

Level: Detented rotary level control, one per channel.

Power Switch: On/off switch applies AC power to the amplifier.

Sel/Prev/Next Buttons: Three buttons near the LCD screen are used to access menu items.

LCD Screen: Backlit liquid crystal display shows speaker presets.

Signal Indicator: Green LED, one per channel, flashes when a very low-level signal is present at input. May be used for troubleshooting cable runs.

–10 Indicator: Green LED flashes when output signal exceeds –10 dB below clip.

–20 Indicator: Green LED flashes when output signal level exceeds –20 dB below clip.

Ready Indicator: Green LED, one per channel, illuminates when the amplifier is ready to produce audio.

Clip Indicator: Red LED, one per channel, turns on at the threshold of audible distortion.

Temp/Fault Indicator: Red LED, one per channel, illuminates under Fault or excessive temperature conditions.

Power Indicator: Blue LED illuminates when the amplifier has been turned on and has power.

Rear Panel Controls and Connectors

AC Line Connector: NEMA 5-15P (15A).

Input Connector: XLR, one per channel.

Link/Out Connector: Loop-thru signal from input connector for linking to another amplifier, one per channel.

Output Connectors: Two Neutrik® Speakon® NL4MP (mates with NL4FC) output connectors. Channel-1 Speakon® is wired with Ch. 1 and Ch. 2 outputs for use with optional single 4-conductor cable. Two binding post outputs (in parallel with Speakon® connectors).

HiQnet USB Connector: Type B, connects to a HiQnet network.

Protection

XTi-Series amplifiers are protected against shorted, open or mismatched loads; overloaded power supplies; excessive temperature; chain destruction phenomena; excessive output current, input overload damage; and high-frequency blowups. They also protect loudspeakers from input/output DC, large or dangerous DC offsets and turn-on/turn-off transients.

Construction

Chassis: Steel.

Cooling: Proportional speed fan with front-to-rear airflow.

Dimensions: EIA Standard 19-in. rack mount width (EIA RS-310-B), 3.5 in. (8.9 cm) high and 12.25 in. (31.11 cm) deep behind mounting surface.

Net Weight:
17 lb (7.7 kg)

Shipping Weight:
21 lb (9.5 kg)

New