Danuser model MD-6 post driver. Local pickup only. Located one and one half hours from Lexington, two hours from Knoxville.

It is PTO driven and delivers approximately 25 blows per minute.

One operating lever controls drive weight through complete cycle, enabling operater to select proper impact force for the specific job.

Broad striking force of 235 lb. free falling weight on the driver may be operated between 52 and 100 inches above ground - with weight in inverted position the range from 0 to 44 inches.

Extra heavy steel channels, steel and malleable castings, baked enamel finish; plating on bolts and pins; sealed, permanently lubricated ball bearings guide driver weight; special wear resistant facing on brake and friction drive wheel. PTO drives friction wheel through bevel gear transmission and roller chain drive.

Approximate weight: 509 lbs.

Storage support stands also included.