Delta 36-L31X-U50 3HP Left Tilt Unisaw w/ Unifence

This Auction includes the Following Equipment:

• Delta 36-L31X-U50 X5 3 HP Left Tilt Unisaw w/ Unifence and Side Extension
• Delta 50-289 Unisaw Mobile Base with Base Extension
• Delta 50-302 Unisaw Out Feed Table
• Delta AP100 ShopMaster 450 CFM Ambient Air Cleaner with Worklight
• 2 HP Dust Collector and Accessories
• Brand NEW! Freud Diablo 80 Tooth Carbide Blade

Hello and Thanks for Looking!

This is Really a great Auction (.99 cent opening bid with NO RESERVE! )

I had been Busily Tooling up Since February for a New Product Scheduled to Enter Production May 25th. The Original Design of 60% Wood and 40 % Metal was Changed Just this Last Week to 100% Metal!  So here I am Scrambling Once Again with Most of my New Wood Working Equipment up for SALE!

The Saw and Air Cleaner have less than 20 hours use, while everything else is BRAND NEW! (Fully tested for correct operation of course.)

I purchased the saw from a hobbiest who had made shelves for his den and called it Quits. Everything is in perfect Condition and Still Under Warrantee. The Unisaw has 4 Years PLUS left on the original Warrenty!

Below I have Included the Equipment Specifications and Hopefully enough good pictures to Accurately Depict the Great Condition of this Machinery.  

Due to the Quantity, Size and Weight of the Machinery for Auction, I am offering Three Delivery Options:

• Local Pickup (with my usual slew of bonus gifts).
• Free Local Delivery (Las Vegas) and Assistance Unloading.
• Or for an additional $50, I will travel within a 100 mile radius of Area Code 89130 for Delivery.

Please email me with any questions!

A "Best in Class" Five Year Warranty!

All X5 series tools are backed by a "best in class" 5 year warranty. That is 3-4 years longer than other brands.

Delta X5 Model 36-L31X-U50 3 HP Left Tilt Unisaw with Unifence includes machine with left tilt, 3 HP, single phase 230V, TEFC motor with full voltage motor starter (GPE); 50" Unifence saw guide with adjustable flip stop, carbide-tipped 50 tooth ATB&R saw blade, laminated table board extension with adjustable steel support legs, two 10" cast-iron extension wings, standard insert, miter gage, motor cover, and 4" dust connector.

Product Description

The X5 is one of the finest pieces of machinery we've seen. It's the left-tilt version of Delta's magnificent Unisaw, and everything from the motor to the finely machined T-slots is of the highest standard. Take the motor, for example. It's a 3 HP, single phase 230-volt with full-voltage starter. It flawlessly powers a positive-traction, three-belt V-drive that runs between two massive lifetime ball bearings for no--and we mean zero--vibration. The table is cast-iron, smooth as glass, along with two cast-iron extension wings and a beautifully laminated table supported by rock-solid, leveler-footed steel legs. Riding along the huge 76-by-27-inch table surface is a 50-inch Unifence guide with an adjustable flip-stop; if you've ever used one, you know the precision. It glides like it's on air and locks down with not a hair's breadth of error, even at its maximum 50 inches to the right of the blade. Even the arbor is a piece of perfection, precision-ground, stress-proofed and flange-faced after production. Inside this 600-pound saw's cabinet is a clever slope that directs sawdust right to the 4-inch duct collector chute to eliminate clogging in the cabinet. Quality saws always have a T-slot for the miter gauge, and this one's no exception, allowing you to extend Delta's super-precise Auto-Set miter gauge far beyond the front edge without tip-out or instability on both sides of the 10-inch blade. The left-tilting arbor allows you a max cut of 2-1/8 inches at 45 degrees, putting big gorgeous bevels well within your reach. If it's precision and power you're after, this is the last saw you'll ever buy.--Kris Jensen-Van Heste

From the Manufacturer

If bevel ripping single-sided laminate is in your near future than this is the saw for you. A left tilt version of our famous Unisaw, this 3 hp single phase unit boasts a new-age computer designed motor cover, which incorporates a new and improved dust efficient design with integrated 4-inch dust connector. Compliment this icon with a 50-inch Unifence saw guide that blends accuracy with versatility, add an Industrial Carbide-tipped blade, and two 10-inch cast-iron wings, and it is easy to see why this Unisaw is the "Standard in the Industry"

Included

 Delta X5 left tilt unisaw (36-L31X-UC50) with 3.0hp, single phase 230 volt TEFC motor with full voltage motor starter GPE)

 50" Unifence saw guide with adjustable flip stop

 Laminated table board

 Adjustable steel support legs

 2 10" cast-iron extension wings

 Standard insert

 Miter gauge

 Motor cover

 4" dust connector

 Instruction manual

SPECIFICATIONS

Blade:

· Diameter: 10"

· Arbor: 5/8"

· Speed: 4000 rpm

Capacities:

· Maximum depth of cut: 3-1/8"

· Maximum depth of cut at 45° angle: 2-1/8"

· Maximum rip to right of blade: 50"

· Maximum rip to left of blade: 12"

· Maximum width of dado: 13/16"

Table:

· Height: 34-1/2"

· Size with extension wings and tables: 76" x 27"

· T-slot miter gauge grooves: 3/8" x 1/4"

Overall Dimensions:

· Height: 39-1/2"

· Width: 84"

· Depth: 75"

· Weight: 593-642 lbs.

· 5 year limited warranty on machines, parts and accessories

Delta AP100 ShopMaster 450 CFM Ambient Air Cleaner with Worklight!

Product Description

The Delta AP100 is a ambient air cleaner with work light it has air flow 400 CFM with filters & 450 CFM without filters.

Features

Extra-long 6' cord
450 CFM
Filter system includes coarse pre-filter, 5 micron inner filter
Eye bolts for suspending from ceiling
Separate hanging on/off pull cords for lamp or fan
Easy grip handle for portability

Specifications 

2 HP Dust Collector and Accessories!

Powerful 2 HP dust collector creates a dust free working environment. Develops over ten times the suction of most shop vacuums. Works with a 4'' hose to pick up large chips from jointers, saws, shapers and planers.

• Locking casters
• Lockable on/off toggle switch
• Motor: 2 HP, 110V, 14 amps, single phase
• Bag capacity: 70 gal.
• Air flow: 1600 CFM
• Single stage
• Filtration: 30 micron
• Hose inlet: 4''
• Overall dimensions: 75-1/2''H x 33''L x 22''W
• Shipping weight: 145 lbs.
• CSA-US certified
• 12" table saw hood mounts to most contractor-type saws
• Jointer hood fits 6" jointers
• Tough, durable ABS construction
• Y connector
• Blast gates
• Two pieces of 4" x 10 ft. poly vinyl flex hose
• Ten 4" double wire steel clamps