HTML clipboard
Digitech GSP
2101 Artist Upgrade Version 3.00.a or 3.00.00.a Chips
Including the 20MHz hardware-upgrade (if needed)!
Finally available also for all 1-EPROM boards!!!
and Replacement Battery!


You are bidding at the original Digitech
software "Artist 3.00.a" respectively "Artist
3.00.00.a" for the Digitech GSP 2101 effects processor.
This upgrade works for ANY GSP2101, GSP2101
Artist, GSP2101 Limited Edition, GSP2101 LE or GSP 2101 Artist PRO!
This auction also includes the internal battery
for the GSP2101 (all Variants) which should be replaced every 7 years.
First:
Check your software-version!!!
- switch off the GSP2101
- switch on the GSP2101 while watching the display.
- The software-version is shown there while boot up.
- E.g. there is shown: "2.01.01.a." or "2.55.a"
That means:
The "2.01.01" or "2.55" indicates your software-version.
The ".a" at the end of the software-version describes, if your GSP2101 runs with
20MHz cycle frequency or not.
If you have a ".a" at the end of the software-version the Z80 (the Z80 is the
main-processor of your 2101) works with 20 MHz.
If you have no ".a" at the end of the software-version the Z80 works with 10
MHz only.
What you will get in this
auction:
A complete software AND hardware-upgrade to 3.00.00.a OR
3.00.a with detailed installation manuals and patch-file (zip-file
download) with editing
software for the GSP 2101!
With the ZIP-file you'll get more then 500 patches for the GSP2101, programmed
by the GSP2101 guru. These patches can be transmitted to your GSP2101 over MIDI.
Be careful! Do not buy from sellers which offer the software upgrade for
2ERPOM board or the 3.00.00 upgrade only!!!
They might NOT work for you unit!! Please email me if you are not sure which
hardware-version you've got!
In this auction you will get the 3.00.00.a or the 3.00.a upgrade (not the
3.00.00 or the 3.00 upgrade!!!)
If you are not sure which GSP2101 version you have or if you have any other
problems just write me!
After the auction has ended I will ask you for your
current software-version and depending to this, I will send you the right parts
you need to perform the upgrade to 3.00.00a or 3.00.a!
Note: I guarantee 100%: This upgrade works for ANY GSP2101,
GSP2101 Artist, GSP2101 Limited Edition, GSP2101 LE or GSP 2101 Artist PRO!
A replacement battery CR2032 (The battery is not necessary for the upgrade, but you should take the
opportunity to replace the battery when you have your unit open)
If you have any questions to the upgrade just write me a message!
You will need a new user manual!!!
After you have upgraded to 3.00.00.a or 3.00.a you will
need a new user manual because the operation functions change with this
software!
You can
download the new (Artist) user manual for free here!!
Item Condition:
These upgrade (chips, battery and hardware parts) are new, tested, in working
condition.
If you don't like the parts you'll get your money back!!!
If you need more GSP2101 stuff:
Check out my homepage:
GSP2101
Site Germany
If you need the mega-rare PPC210
for your GSP2101:
Check my other auctions or contact me:
GSP2101 auctions
Software-Upgrade (Artist Upgrade):
If you have a software-version earlier than 3.00.00 or 3.00 you should upgrade
to it.
The 3.00.00 is the same as the 3.00 software. It is called "Artist-Software".
After the upgrade you will have the following benefits if you now have
software-version less than 2.00.00:
- Software version 3.00 supports the PPC 210
- Software version 3.00 includes algorithms for the PPC 210 usage
- Fixed memory problem resulting from MIDI program change commands
- Smoother Wah-Wah
- Quick access to CC links (press/hold MIDI button)
- Other misc bugs solved
- NOTE: Bulk SysEx MIDI data dumps are incompatible between versions 2.xx.xx
and previous versions. However, individual program dumps are still compatible.
After the upgrade you will have the following benefits if you now have a
software- version less than 2.05.05 or 2.55:
- Smoother Wah-Wah
- New Presets created by popular guitarists and bassists
- Improved tuner with dropped tunings
- New Smooth Whammy with polyphonic shifting
- Improved Chromatic Pitch Shifter User configurable algorithms
- Extensive preamp featuring two 12AX7 tubes and 3 solid state distortions
- Upgradeable with a PPC-210 expander for seamless program changes
- New programmable speaker simulation
- Improved C-1 Programming interface (using links)
- Added MIDI command to help facilitate programming an editor. librarian
- Added Utility feature to alter the Program/Bank/Tuner and Bypass
footswitches on the C-1.
After the upgrade you will have the following benefits if you now have a
software- version less than 3.00.00 or 3.00:
- Some bug fixes
- Intelligent Pitch Shifting
You will get the following benefits by installing
the 20MHz-upgrade:
(If you have a ".a" at the end of the software-version you already have
the 20MHz upgrade installed! If you don't have a ".a" at the end of the
software-version you will get the 20MHz upgrade in this auction)
You will double the clock of the main processor
(The Z80) from 10MHz to 20MHz.
The speed increase is associated with:
- program changes
- higher multiplex speed of the 7 segment display and the LEDs
- expression controller responsiveness
- speed of response to user commands (operating system
response)
- speed of boot up
- refresh rate of the display
- algorithm compilation
- etc.
Happy bidding!!!!
Shipping options and rules:
The buyer can choose registered or insured shipping at any time, also if this is
not listed in the shipping options below or the Ebay checkout. The buyer should
ask me for the costs of these options before the auction ends.
EUROPEAN BUYERS: This listing is not for European
buyers!
European buyers please
click here - or contact me!



