This item has been added to My eBay for Guests. As a guest, you can: Track up to 10 items on this computer in My eBay Receive an email reminder for this item a few hours before it ends
Chassis is ready to rock and roll, their are plenty of holes to mount the motor and body, the holes are 3/8 dia on the top and ends of the chassis. Chain and sprocket size is number 40 , the small sprockets connecting the two axles has 12 teeth and the larger sprocket has 20 teeth, the distance between the axles is 16 inches. The chassis is very heavy duty, constructed of 3 X 5 X 3/8 angle, end plates are 3/8 thick also, wheels are very close to IBLS standards, the only thing is the flange is larger. Springs are 70 lbs per spring, axles are 3/4 dia. with 3/16 keyway running the total length of the shaft. the bearing block rides on Delrin bearing material, the whole chassis weigh is 85 lbs.
Total length is 24 inches X 15-3/4 inches wide, distance from the rail to the top of the chassis is 6-1/4 inch, the wheel thread dia. is 5-1/4 with a 2 degree angle. The chassis will ride on our 20 foot diameter track set, but preferably on our 30 and 40 foot dia. track set, wheels can be moved in closer for tighter curves by adjusting the split colars. Chassis also comes in 10 and 12 Gauge. Due To The Selling On Our Website, Allow One Week For Delivery, Depending How Many You Order, IT Could Take Longer.
*Sellers are not responsible for service transit time. This information is provided by the carrier and excludes weekends and holidays. Note that transit times may vary, particularly during peak periods.
Return policy
Return policy not specified. Read item description for any reference to return policy.
Track up to 10 items on this computer in 
)
