| FOSTEX UR-2
STEREO MEMORY RECORDER
RRP $1899.00 - HOT SALE PRICE
BRAND NEW,UN-USED, BOXED, READY 2 GO!
PRODUCT INFORMATION:
Whats for Sales Today? - FOSTEX UR-2 (as seen in picture).
Any questions regarding the item please ask.
Please Note OverSeas Customers: I am more than happy to ship anywhere in the world, anytime. The item will be sent, marked as a gift and you may also nominate the value of the product to avoid any further taxes in your country.
Fostex UR-2 - The UR-2 is a 1 U rack size stereo audio recorder using SD card and USB storage device that is flexibly adapting to the wide variety of playback requirements.
The UR-2 is a new generation stereo memory recorder from Fostex that uses 2 SD cards (SDHC compatible) and USB storage device as the recording media. The recording/ playback file format is BWF (WAV). Its ample playback functions will adapt to the wide variety of playback requirements. It offers high quality recording of up to 24bit/96kHz (in BWF format). Employing FAT 32 disc format, it is easy to process the file transfer to a PC based DAW.
The analog input and output are balanced XLR/+4dBu and un-balanced RCA/-10dBV, the digital input and output complies to AES/EBU and S/P DIF digital signal. It is flexible to be used in the available audio system. The playback function includes Chain Play and Timer Play, it is suitable for live stage performance and sound installation. In addition to the external control via parallel remote with D-Sub 25pin and RS-232C serial remote, a USB keyboard and 10-key keyboard can trigger the instant playback start, which is very useful at a live event, theater and broadcast environments.
The Mic input located on the front panel offers 48V phantom power, it can be used not only for recording but also for speech to be mixed with playback source. Last but not least, its newly employed organic EL display gives an extremely clear visibility. This combined with DC power operation, it serves for outdoor use very well.
1. Live Concerts and Lectures - The UR-2 offers digital audio recording resolution up to 24bit/96kHz. This satisfies demands in such critical musical environments necessary in classical music concert and piano recitals. When the bit rate and sampling frequency are set at 16bit/44.1kHz, The UR -2 can record over 3 hours with a 2GB SD card. This can accommodate the recording of long lectures without interruption. The UR-2 offers 99 Cue points per file, which are used to locate an important scene transitions and critical song location points. The recording format is BWF (WAV) on both the SD card and the USB storage device. The files are easily transferred to a PC. In addition, these files can be also used in today?s portable music players.
2. Shopping mall and public space - The UR-2 can be used for playback of announcements in public applications such as shopping malls or airports. The Power-ON Play feature will automatically start audio playback upon powering up the unit. The Timer Play function will manage the auto start program based on its internal 24-hour clock. The microphone input located on the front panel can be mixed with the playback sound from the SD card or USB storage device. The user can adjust the mix balance. The playback sound level can also be totally muted if desired. This functionality is useful to add an announcement over the programmed background music.
3. On stage - The UR-2 will conform to stage sound playback for musical and live stage performances. The "Chain Play" mode manages the file list and the order of file playback. Start and end times can be specified by user added Cue points. The UR-2 can also program files to pause at the beginning of next file waiting to be played back.
4. Broadcast industry - Utilizing the BWF (WAV) format, the UR-2 can playback sound data created by a DAW. UR-2 recorded files can be easily imported to a DAW for editing purposes as well. File transfers with a PC are accomplished by mounting the SD card/ USB storage device or by the high-speed transfer via the USB 2.0 port provided on the UR-2. The memory play mode offers instant start of the audio so that there is no delay upon pressing the button. The UR-2 can take a fader start command from the mixing consol to aid the operators? task and helps avoid missed cues. This is highly desirable in any broadcast environment. A USB keyboard or Ten-key keyboard can be used as a remote controller and file titling
Features:
- 2 sets SD card slots and a USB host connector for alternate recording/playback among the different media.
- Stereo or Mono WAV (BWF) recording to SD card (also SDHC) and USB storage device
- Fs: 44.1/48/88.2/96kHz, Quantization: 16/24bit
- Future software update enables the MP3 playback and recording (estimated delivery within 2008)
- High speed file transfer with PC via USB 2.0 (bi-directional)
- Employing FAT32 format, it allows to directly mount the recorded files to PC.
- It adapts to a wide variety of use environment by offering Chain Play and Memory Play.
- Timer Play and Power ON Play enable automatic playback start for such as chime and repetitive announcement, which are convenient in the installation audio industry.
- The play mode list employs CSV file format so that it is easy to edit by a text editor or spread sheet program software on PC.
- 99 Cue points with locate function. Waveform display under Scrub mode offers easy and visual Cue point setting
- Microphone input with P48V available on the front panel. Not only for recording but for speech to be mixed with playback source.
- Analog I/O with balanced XLR and un-balanced RCA pin jacks, Digital I/O with XLR connectors
- An organic LED display offers high visibility.
- Remote transport control via Foot SW, Parallel remote pot (D-sub 25pin) and RS-232C (D-sub 9pin)
- External USB keyboard can be used not only for file name editing but for transport control such as REC and PLAY.
- DC power for the convenience in outdoor event and location recording
Specifications:
|
RECORDING / PLAYBACK |
|
Recording media: |
SD card (2 slots, SDHC, 128MB~32GB) |
|
|
USB port for USB storage device (USB 2.0, Hi-speed) |
|
Sampling frequency: |
44.1/48/88.2/96kHz (24bit), 44.1/48kHz (16bit) |
|
Record format: |
WAV (BWF), MP3 *with future software update |
|
ADC/DAC: |
24bit Delta-Sigma modulation |
|
Recording time: |
Approx. 94minutes (1GB SD card/16bit/44.1kHz/stereo) |
|
Recording track: |
Stereo or Mono |
|
Frequency response: |
20Hz~20kHz ±2dB (44.1/48kHz) |
|
|
20Hz~40kHz ±3dB (88.2/96kHz) |
|
S/N (between ADC and DAC, 24bit, 48kHz): |
Line 103dB or more (typical) |
|
|
Mic (with Max gain) 85dB or more (typical) |
|
Dynamic range: |
103dB or more (typical) |
|
T.H.D: |
Line 0.006% or less (1kHz, -1dBFS) |
|
|
Mic (with Max gain) 0.01% or less (1kHz, -1dBFS) |
|
Reference level: |
-12dBFS/-20dBFS (switchable) |
|
|
|
|
INPUT / OUTPUT |
|
0dBu = 0.775Vrms, -10dBV = 1.0Vrms |
|
|
Analog input (INPUT L, R) |
|
|
Connectors: |
XLR 3-31, balanced (pin #2 hot) |
|
|
RCA pin jack, un-balanced |
|
Nominal input level: |
+4dBu (XLR/ balanced) |
|
|
-10dBV (RCA/ un-balanced) |
|
Maximum input level: |
+24dBu (-20dBFS, XLR/ balanced) |
|
|
+10dBV (+20dBFS, RCA/ un-balanced) |
|
Input impedance: |
more than 10kΩ |
|
Microphone input (MIC IN) |
|
|
Connector: |
XLR3-31, balanced (pin #2 hot) |
|
Nominal input level: |
-56 ~ -12dBu |
|
Maximum input level: |
+7dBu (with Max gain) |
|
Input impedance: |
more than 1.5kΩ |
|
Phantom Power: |
P48V |
|
Analog output (OUTPUT L, R) |
|
|
Connectors: |
XLR 3-32, balanced (pin #2 hot) |
|
|
RCA pin jack, un-balanced |
|
Nominal output level: |
+4dBu (XLR/ balanced) |
|
|
-10dBV (RCA/ un-balanced) |
|
Maximum output level: |
+24dBu (-20dBFS, XLR/ balanced) |
|
|
+10dBV (-20dBFS, RCA/ un-balanced) |
|
Load impedance: |
more than 10kΩ |
|
Digital input |
|
|
Connector: |
XLR 3-31 (pin #2 hot) |
|
Format: |
IEC60958 (AES/EBU) or IEC60958 (S/P DIF) *Auto select |
|
Digital output |
|
|
Connector: |
XLR 3-32 (pin #2 hot) |
|
Format: |
IEC6d0958 (AES/EBU) or IEC60958 (S/P DIF) |
|
Headphones output |
|
|
Connector: |
Φ6.3mm stereo phone jack |
|
Maximum output: |
100mW (with 32Ω load) |
|
Remote |
|
|
Connector: |
D-sub 9pin (RS-232C), D-sub 25pin (Parallel) |
|
Foot SW |
|
|
Connector: |
Φ6.3mm phone jack |
|
USB port |
|
|
Connectors: |
A type (Host, Keyboard) |
|
|
B type (for PC, USB 2.0 Hi-speed) |
|
SD card Slots: |
Standard SD card slot x 2 |
|
|
|
|
GENERAL |
|
Dimensions: |
482 (W) x 44 (H) x 195 (D) mm |
|
Weight: |
Approx. 2.3kg (except AC adaptor) |
|
Power requirement: |
DC12~24V, Standard AC adaptor included |
|
Connector: |
XLR 4-32 |
|
Power consumption: |
Approx. 5W |
Thank you for taking the time to look at my auction
&
Happy eBaying.
GENERAL INFORMATION & RETURNS:
- If you require further information regarding the item listed then please ask. I respond to 99% of all emails within the first 24 hours.
- As a courtesy, please do not email me with your suggestion of a price that I should be listing an item for. Remember it’s my auction and I have the right to select the sale price.
- Some items may be withdrawn from sale without notice. The reason for this is that the item/s for sale may also be listed and sold in various other websites simultaneously.
- A majority of my auctions list information & specification that have been advised by the manufacturer and are subject to change without notice.
- All items listed for sale are genuine, I do not deal in fakes, cracks, copies or cheats.
- All used items have been checked and tested in various ways. I only offer items for sale that function correctly unless otherwise stated. I do not sell goods with the knowledge that they are faulty but parade them as fully functioning, because lets face it, I use ebay to make purchases and I would annoyed if I purchased something that didn’t function correctly.
- All electrical items use an Australian power supply unless otherwise stated.
- I am happy to offer a return/warranty period on all of my items unless otherwise stated. I accept returns if the item does not work due to a manufacturing fault only. I do not accept returns because you miss used it, you damaged it, you didn’t like it, you purchased it by mistake, it didn’t suit your purpose etc.
- The return/warranty period is generally 7days from the date of receiving your purchase, however some new items may fall under the full manufacturers warranty. I have given a 7 day period for return/warranty so it encourages you to test your purchase immediately because if it fails then generally it’s going to fail in the first 7 days. You must contact me within that 7days of receiving your item to notify me of a manufacturing fault.
- Returns/warranty shipping is at the buyers expense. I do not refund postage costs. The item must be returned in somewhat the same condition it was originally sent, please do not tampering or make things look worse than what they are. The refund on the purchase price will only be given once I have tested the item and deem it to have failed due to a manufacturing fault. If the item is not faulty due to a manufacturing fault, no refund will be given and you will be cost responsible for the return shipping costs. You may find some of the conditions mentioned unfair, but lets put it in perspective, when you buy an item from a retail store and it fails, you would usually have to follow the same procedures.
PAYMENT INFORMATION:
- In most cases my auctions are listed as “BUY IT NOW” this means if you have committed to the sale then you are prepared to “BUY IT NOW”, not in 5 days, not in 10 days etc. If you are short on cash/funds then please email prior to committing to buy.
- Once you have committed to a purchase I require some form of contact from you within the first 24hrs
- Payment is appreciated within the first 1 – 3days after you have committed to a purchase. If you are short on cash/funds for any reason then please email.
- A payment reminder will be sent daily until the item has been pair for, up to a 7 day period. Don’t get offended by this, it’s a payment reminder.
- If payment has not been made within a 7 day period, an eBay dispute will be opened in order for me to re-coupe the final value fee. If no payment or contact has been made after a further 8days then I will close the dispute, you will get an eBay strike against your profile and negative feedback left for you. Again this is not being rude, just follow the rules and we will all be happy.
- I accept the following payments from Australian eBay users – PAYPAL, BANK DEPOSIT, MONEY ORDER/CHEQUE, CASH (Local Pick Up)
- I accept the following payments from Overseas eBay users – PAYPAL
- From June 2008 I understand that eBay Australia will only allow payments via PAYPAL, so if you don’t have a PAYPAL account then get one now.
- No cash is to be sent by mail
SHIPPING INFORMATION:
- Shipping is generally quoted at flat rate, that means shipping to anywhere in Australia will cost the nominated amount.
- All items listed are located in Australia in with me unless otherwise stated.
- Delivery is via Australia Post (Express or Registered) or Courier
- If a courier is listed as the shipping type then please ensure you list a residential address or business address for delivery as courier companies do not deliver to PO Boxes.
- I am open to Pick Ups occasions, but please email me to discuss, rather than just assuming it will be ok.
- Once your payment has been received consider your item shipped without delay. If there is a problem I will let you know about it immediately.
- If you are concerned about shipping of your item then you are more than welcome to contact me.
- Shipping time is as follows Express Post – Within Australia 1-3 Working Days. Registered Post – Within Australia 1-7 Working Days. International Airmail – Overseas 7-14 Working Days. These times can vary at peak seasons
|
Back to home page
) 
WE_ARE_UNITED2_MUSIC
Print
Report item
and your 