Fiber Optic Collimator Laser Diode Engraver Etch Cut FC

Fiber Optic Collimator for FC Cables

Here is a fiber optic collimator assembly that can focus the output of a fiber optic cable to a narrow beam or a small spot suitable for engraving, etching, cutting or burning.  This fits fiber cables with an FC type connector.  Check my other auctions for collimators with other connectors.

The collimator block is 1" x 1" x 3/8" and has 6-32 mounting holes on 2 sides.  The focus is adjustable with the lens on fine pitch threads.  This can be used with lasers up to 5W with a fiber NA up to .22.  It works great with the 1 to 3 watt fiber coupled 830nm laser diodes that I and several other sellers offer on eBay.

Here I've got one of the collimators set up with a 1 watt 830nm fiber coupled laser diode like I offer in other auctions.  With the focus properly adjusted, it is able to burn very small holes at a distance of 2-3 inches.  This means that it can be used for finely detailed engraving and etching.  The bracket shown here is not included in this auction.

Here you can see the holes are a small fraction of a milimeter.  Theoretically, you should be able to focus the laser beam to a spot the same size as the fiber core diameter.  With a 100um fiber, that gives a resolution of 0.1mm or about 0.004 inch.

SPECIFICATIONS

• Size: 1" x 1" x 3/8" (25.4mm x 25.4m x 9.5mm
• Mounting Holes: 6-32, 2 sides
• Material: 6061 Aluminum
• Collimator Thread: M9x0.5
• Fiber NA: 0.22 maximum
• Laser Power: 5W maximum
• Laser Wavelength: 600-850nm

CAUTION

This device allows you to change the highly divergent and thus not very dangerous output from a fiber coupled laser into a narrow beam or a finely focussed spot which can be extremely dangerous, especially when used with invisible infrared lasers.  Be sure to use appropriate safety goggles and avoid stray reflections when working with this.

To see other related items, be sure to Visit our eBay Store

If you like what you see, you can Add Junktronix to your Favorite Sellers List

About Junktronix

"One man's junk is another man's treasure"

Junktronix has been buying and selling Silicon Valley Surplus electronics, photonics, optics, laser equipment, test gear, mechanical and robotics components and more since 1996. Unlike a lot of surplus dealers, we try to understand what we're selling so that we can test it and offer technical support. Check our feedback and you'll see that we sell high quality "junk" and take good care of our customers.