Break through concrete floor with a sledge hammer or a drill, chip a hole to desired size. Dig out under the floor as illustrated to about 3 inches below position of safe. The more reinforced concrete that can be placed around safe, the greater the security. Partially fill hole with concrete mixture and reinforcement, place the safe in the hole, and push the safe down until the top is level with the finished floor. Finish adding the new concrete around the safe. Make sure the top of the safe is kept level with finished floor.

Remove the safe door during installation and store it out of the way, reinstall after cement is set. Seal the dust cover with duct tape to prevent cement from seeping inside. No additional preparation is required to the body of a Hayman In-Floor Safe. If safe is placed where water might run into it, raise safe slightly above floor level and taper concrete up to dust cover level.

Order your safe with the Water Resistive Seal for new construction installation. Dig out ground to provide a form as shown for cement floor installation, put safe in position in live concrete in hole and adjust safe to floor level. When safe is locked securely by the setting up of cement, fill remaining hole and finish slab pour.

All products carry a warranty to the original purchaser to be free from defects in material and workmanship for three (3) years from original date of purchase (excluding all electronic locks). Electronic locks have a one (1) year warranty period while the safe will be warranted for three years. Custom safes carry a one (1) year warranty regardless of the type of lock. These warranties apply only to new safes purchased from its authorized dealers. Proof of purchase must be provided so as to establish date of purchase and supplying dealer.

Safe Co. will at its option repair or replace any defective part or unit. To obtain service on warranty the unit delivered to its authorized dealer. Authorization must be received from the Safe Company prior to performance of any warranty work.

Improper installation, use, lack of proper maintenance or accidental damage will nullify this warranty. No other warranty, expressed or implied, is offered. This warranty cannot be changed, modified, enlarged or altered without direct written consent from The Safe Co. PrivateSecurityProducts & the Safe Co. is not responsible for consequential damage, incidental expenses or personal injury. This warranty gives you specific legal rights. You may have other rights which vary from state to state.

The Safe Co. will at our option replace or repair any of our standard production safes equipped with a 3-bolt mechanism or better that are successfully burglarized. To claim this guarantee, call for authorization to ship (at your expense) the burglarized safe and a copy of the police report to us. We will repair or replace the safe and return it to you, freight collect.

The Safe Co. will, at our option, replace or repair any of our polymer bodied floor safes equipped with a 3-bolt mechanism or better, that are ever successfully burglarized (except S1201), damaged by fire, or damaged by seepage through the body.

Returned goods can only be accepted after buyer first notifies PrivateSecurityProducts. in writing and The Safe Co. grants permission to do so. All returned goods must be shipped pre-paid and will be subject to 20% cancellation charge. A return goods authorization number must be obtained and number must be affixed to all returned packages. An additional charge will be applied for excessive damage on a per unit basis.

Please visit PrivateSecurityProducts.com....over 330+ safes from Commercial Industrial to Fireproof, Burglary, ATM's, Rotary safes and Home safes & misc. ALL discounted to save you money plus Safety and Security products for your whole family and business protection !!