A reserve price is the minimum price the seller will accept. This price is hidden from bidders. To win, a bidder must have the highest bid and have met or exceeded the reserve price.
Fully Environmental Trailer Pressure Washing System
When you need to be able to work in any situation without the fear of Environmental violations or fines this is the equipment for you. Look no further because there is nothing else out there that even comes close!!!
Our
machines are
top of the line and can be found cleaning in with our military in Iraq
and with the British Aerospace program, this equipment is brand new,
full trailer mounted, custom made in the USA,
this unit is ready for any industrial work that you throw at it. Comes
with all manufacturers warranties. ( 2 year warranty on motor, 10 year on pumps, 5 year prorated on Burner)
This is our "Fully Environmental Trailer Pressure Washer" and comes with the equipment you need
to start making serious money. Power Wash Industries has been in the
cleaning business since 1972.
We are not an internet only store. Our headquarters are in SLC Utah in
a Brick and Mortar operation. We also provide hands on training here in SLC. We also provide you with videos on safety
and service on this equipment.. Call for delivery quote to your area. We will work with you. Call JD at
800-443-5165. Here is what the package includes.
* CHECK OUT OUR FULL PROGRAM WITH COMPLETE TRAINING AND MARKETING PACKAGES ON PowerWashIndustries.com
Fully Environmental Trailer Package
cut and paste the link below to watch a full walk around video on this trailer package
Machine Description: 1 Hot Water Motor: 20 HP Honda V-twin Engine Pump: General TS 2021 Ceramic Plunger Pump Generator: Winco 2000 Watt General Complete System Belt Driven Frame: Powder coated, uni-body built reinforced structural supports for added "over the road" shock support for coil support. 2nd Machine Description Motor: 13 HP Honda Cold Water Pump: General Pump Ceramic Plunger Pump 4 GPM @ 4000 PSI Frame: Aircraft Aluminum Mounted on deck
Motor and Pump Power Plate: Pre-assembled "Power-Plate" engineered to accept a variety of motor options. This enables the operator to change/service any component (motor, belt, generator, pump support brackets) in minutes not hours. The "Power Plate" is attached to the frame by 6 2" x 3/4" rubber grommets. This acts as a vibration dampener for the pump system, and extends the operation life the entire unit. Burner System: We use a 110 volt oil powered burner system. It is powered off the generator, (Winco - 2,000 watt - Top of the line, which is belt driven). This creates a very reliable system with 10 times the voltage of a "12 Volt" system. This has a "spin on" oil filter with oil/water separator to protect the fuel pump. Fuel Tanks: 8 gallons each. Cross link poly-propylene plastic, originally engineered as racing fuel cells - they will not sweat or rust out or wear out. Other Engineering Features: Stainless Coil and Engine Cover - will not rust, and reduces moisture on engine while not restricting air flow to engine. Horizontal Coil System - cold rolled continuous schedule 80 coil. The horizontal coil is much easier to support for "over the road" transportation. The coil can also be removed from the top by removing 6 bolts - rather than pulling the coil out where the burner is (End-Cap). On Board Generator: Provides electrical power to dual sump pumps on board reclaim system. All Stainless Steel Fasteners- All the nuts and bolts will not rust.
*3500 psi Premium TS2021 General pump at 5 gal. per. min.
*325 gal water tank
* 7 X 14 Treated Wood Deck Trailer ( 10k Axles) With Yellow Epoxy finish
* Trailer has electric brakes
* 21" Reclaim Surface Cleaner
* Premium Led Light Package
*3 custom mounted hose reels 200' of Goodyear 4,000 psi hose & 100' of garden hose)
* 2000 watt "Wenco" generator Complete system belt driven. Sealed for superior protection
* Custom mounted Tool box for gun,wand and hose storage
* Deluxe Six lug wheels
* Downstream chemical injectors with a 12 Gal Chemical Tank
* 1 "Premium" rotating turbo nozzles
* 2 Lances (Dual Chemical Lance wand Plus Standard Lance)
* 2 Standard high pressure Lances
* 18' Telescoping Wand for those hard to reach places
* 4 Sets of pressure tips
9 HP Water Recovery System
Comes complete with the Recovery Tank, 4' VacuBerm, Auto Pump-Out, and two 50' Vacuum Hose Sections.
Special Features include:
* Reliable, Heavy Duty Intek Pro Engine
* Hi-Flow Silencer System - Super Quiet
* Triple Powder-Coated Recovery Tank
* Affordable, Compact, Portable, Lightweight
* Multi-Purpose Vacuum or Wash Water Reclaim
X-11 Watermeister H2O Treatment System
END EPA HEADACHES!
WORK ANYWHERE WITHOUT FEAR
ONE YEAR WARRANTY
INTERGRATED CLOSED LOOP SYSTEM
AUTOMATIC OPERATION
MAKE SERIOUS MONEY
LOW COST MAINTENANCE
ZERO WATER DISCHARGE
NO PERMIT REQUIRED
THE SYSTEM WORKS!
* Full Accessory Pack with replacement filters and belts * Full Service and Walk Around DVD's Great for training the 4 lucky guys that get to work this rig.
CALL JD About Financing a Lease Deals that we have available 1-800-443-5165
7 Things to know before buying a pressure
washer on the Internet
7
Things To Know Before Buying a Pressure
Washer
1
Beware Internet Only
Operation
2
Don't Buy 12 Volt Burner Units
3
Think Twice Before Buying from a Franchised
Dealer
4
Buy A Machine Engineered for Easy Service
5
Always Get A Written Warranty
6
Cheapest Is Not Always the Best
7
Don't Undersize Your Equipment
BUYING FROM A P.O. BOX OR WEB ONLY OPERATION!!
This
is obvious with most any purchase, especially when
buying expensive wash equipment. A company
with a P.O. Box has very little investment. Where
will they be tomorrow, come warranty time? You
want to deal with a company
that
has experience, parts and service personnel. Before you buy, ask
yourself the question: Will this company take
care of my future needs?
DON'T BUY 12 VOLT POWERED BURNER UNITS!!
Before you buy, ask how the burner is powered. Yes, perhaps you will save money
on the initial purchase of a 12 volt system, but you will need the money you
saved for the future repairs! 12 volt units draw their power to run the burner
system from the battery. The engines diodes recharge the battery. The problem
is that the diodes do not generate enough amps to keep up with the burner.
As a result the fan motor slows down and the heating coils soot up from the
lack of air flow. This huge engineering problem creates a mess and requires
the coils to be cleaned more often. Vibration, operator controls, elevation,
engine RPM all affect the engine diodes and we haven't seen any other system
that is reliable! The pressure wash equipment we build all have their own separate
generators - producing 115 volts to power the burner system! Obviously a 115
volt system with its own generator has 10 times the voltage and therefore is
10 times more reliable in operation.
**THE 12 VOLT EXCEPTION!! ON OUR CONTRACTOR SERIES- We use a separate belt driven GM/Delco alternator system that generates 65 amps of continuous power instead of the 15 to 20 amps that are generated from standard 12 volt systems. ( When is the last time your car alternator quit working??) This superior engineering has proven to be very reliable and cost effective.
BUYING FROM A FRANCHISED BIG NAME DEALER!!
Are franchised brands the best?
Most major brands are owned by foreign Companies.
This means your dollars are being sent to foreign
country. The two largest name brands, Landa and Hotsy,
are owned by a West German company named Kartcher and are, mostly being manufactured
in Mexico.
Their sole purpose is profits - not building "industrial
grade" units.
Their "commercial/light duty" units have a shorter service life than
industrial units have, making it necessary for you to buy more parts (which
are only available through them) and consequently more labor charges. This
way they can sell you another new unit much sooner than if you bought "industrial" quality
in the first place.
Their units are mass produced (mainly outside the
U S A), and their dealers are under extreme pressure
to sell only their units. The bottom line is;
they are going to sell what makes them and their dealers the most money --
Not what is necessarily best for your needs!
BUY A MACHINE THAT IS ENGINEERED FOR EASY SERVICE!!
If it's not engineered for easy service - don't buy it! Most units are poorly
engineered - they might look fancy, but what about changing oil on the motor
and pump? Rebuilding a pump? Changing belts? Access to burners? etc. Every
machine needs service! Beware of the poor engineering!
KNOW THE WARRANTY!!
Ask your dealer for a written
warranty.
CHEAPEST IS NOT ALWAYS THE BEST!!
Don't buy cheap if you want quality!
DON'T UNDERSIZE YOUR EQUIPMENT!!
If you are using your pressure washer for heavy duty cleaning, say at a construction
site, or most commercial applications, don't buy a light duty consumer pressure
washer it just won't hold up. Make sure you purchase a pressure washer that
will fit your needs and application.
You can contact your seller to arrange to pay for and pick up your item.
*The estimated delivery time is based on the seller's handling time, the shipping service selected, and when the seller receives cleared payment. Sellers are not responsible for shipping service transit times. Transit times may vary, particularly during peak periods.
Back to home page
) 
PowerWashIndustries
Print
Report item
and your 
