This item has been added to My eBay for Guests. As a guest, you can: Track up to 10 items on this computer in My eBay Receive an email reminder for this item a few hours before it ends
Gear Reducer Drive with electric brake. There is no name plate on the drive, it is only marked R3 Reducer. Ratio is 60 to 1. There are two access ports, one near the top and one on the bottom. Shaft is 1” diameter x 1.75” long. There is a chain sprocket 3” diameter with 11 teeth. On the motor side the shaft is 7/8” diameter and 2.75” long. On this shaft is a electric brake and a pulley. The pulley is 9” diameter, 1/2” belt. The electric brake is spring loaded and is actuated by 120V solenoid. There are plugs for oil level, fill and drain. At the base are 4 mounting holes 6” x 5” center to center. Because of the large pulley the drive has to be elevated minimum 2”. Dimensions- 6.5” x 10” x 9” (not counting shafts and solenoid). It weigh 65lb. Drive is in good working condition.
For questions please send email to: lubomir@warwick.net
Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.
00057
Shipping and handling
Save on shipping - buy additional items now from this seller's other listings!
Ships to
Worldwide
*Sellers are not responsible for service transit time. This information is provided by the carrier and excludes weekends and holidays. Note that transit times may vary, particularly during peak periods.
Return policy
Return policy not specified. Read item description for any reference to return policy.
Track up to 10 items on this computer in 
)
Save on shipping - buy additional items now from this seller's other listings!