| This engraver has only been used about 50 hours and is in good condition and fine working order. Retails for $9880. Comes with software or can be used with 3rd party software and several extra bits (Diamond and router/cutter). Works with windows 98. You will probably need an update to run XP. Shipping will have to be freight and includes a crating fee or you can pick up the item locally.
|
Servo1212 is a servo control 3 dimensional (3D) engraving system developed by Square Engraving Systems, a pioneer in the computerized engraving industry. The table is made up of high strength aluminum plates to provide rigidity for small character engraving or larger area 3D routing. H Square Engraving Systems?high performance servo controller delivers speed, accuracy with ¡°no stepping? and quietness a quality machine should have. The system comes with a standard Windows engraving software, the Eng98, developed by H Square Engraving Systems. Or you may use 3rd party software, since the controller is ¡°open?accepting HPGL file Servo1212 is ideal for medium to high volume production of plaque engraving, name plates, sign making, wood working, plastic sheet fabrication, instrument panels, directional panel etc. |
|
|
<!--[if !supportEmptyParas]--> <!--[endif]--> |
|
Suggested Applications: |
<!--[if !supportEmptyParas]--> <!--[endif]--> |
|
|
<!--[if !supportEmptyParas]--> <!--[endif]--> |
|
• medium to high volume production of plaque engraving |
<!--[if !supportEmptyParas]--> <!--[endif]--> |
|
• sign making |
<!--[if !supportEmptyParas]--> <!--[endif]--> |
|
• wood working |
<!--[if !supportEmptyParas]--> <!--[endif]--> |
|
• plastic sheet fabrication |
<!--[if !supportEmptyParas]--> <!--[endif]--> |
|
• instrument panels |
<!--[if !supportEmptyParas]--> <!--[endif]--> |
|
• directional panels
|
Table |
|
|
|
|
|
|
X: 12"
Y: 12"
Z: 1" Clearance and Travel |
- Positioning Speed (Rapid Travel)
|
Up to 300"/Min
|
|
|
0.1" to 300"/Min. |
- Z-Axis (Spindle) Down Speed
|
0.1" to 300"/Min. |
|
|
0.0005" |
|
|
0.001" to 0.002" |
|
|
1/4" pitch stainless steel, anti-backlash, Teflon coated lead screw and nut |
|
|
11/64" top loading engraving spindle with 90 W AC motor (15,000 rpm)/ 3 speeds: 8,000, 12,000, and 16,000 rpm |
|
|
Aluminum plate, and extrusion |
|
|
Precision machined Aluminum plate |
|
|
115 V |
| · Table Flatness: |
0.004” |
| Controller (IM Controller) |
- 3 Axes, DC Servo Feedback Control
- DSP CPU (TT320E14) for motion control
- Positional Feedback, Single Ended Quadrature Encoder Input (A, B, I)
- Servo Output (per Axis)
- 48V, 3 Amps. Continuous
- 48V, 4.7 Amps. Peak
- 8 Uncommitted I/O Ports
- Operator Control Panel, including:
- Emergency OFF Button
- Z Position Display
- X & Y Feed Rate Display
- Cancel Button
- X & Y feedrate override
- Z Feed Rate Override
- Z Position Override
- Status LED Display
- Set Z Origin/Stroke Button
- Spindle ON/OFF Auto Button
- Home/Origin/Down Position Button
- Start/Pause/Resume Button
|
| Motion Software Features |
Application Software |
- Open Architecture, accepts popular 3rd party formats (HPGL, GM Codes)
- Fully Synchronized Contouring Motion on all 3 Axes simultaneously
- Arbitrary 3D Curve Spline Data Smoothing
- Circular Interpolation
- 2nd order PID Servo Loop
- Velocity and Acceleration Feed Forward
- Ramp Down Look Ahead
- Choice of Constant or Optimum Feed Rate
- Dwell Commands
|
· Eng98 Windows Based Software (Standard)
· QEG Engraving Software (Standard)
· D14 Engraving Software (Optional)
· QGM (optional)
· QHPGL (Optional)
· Other 3rd Party Software (Optional) |
|
<!--[if !supportEmptyParas]--> <!--[endif]--> | http://www.hsquare.com/hsquare/asp/productdetails.asp?prodid=4 |
Back to home page
) 
EVMotorsports
Print
Report item
and your 