Highend Systems - Lightwave Research

 F-100 Fog Machines

 Lot of (3) + (1) Used Machines and (2) Timer Remotes

This auction is for four F 100 Fog Machines. These are older units, some work some don't. The machines are being sold AS-IS based on the descriptions below. The F100 has been the touring and nightclub standard for years and years and is still produced today. As you know, keeping them running can be an expensive venture as they get older so here's your chance to load up on parts and pieces. I am selling this lot of four (4) for parts and rebuilds although some of them work. F100 parts can be costly with the main board costing more than $350, the heat exchanger at $346 and the pumps at $210. Here's a breakdown of the units available...

1.) Unit #1 serial number 151315104 and dated 1995 works fine, but if left plugged in heated up for hours on end tends to trip the internal thermal fuse. Once reset, its fine again. Includes Timer Remote

2.) Unit # 2 serial number 151264044 and dated 1994 heats up, but the timer remote seems to have the buttons stuck. Produced no fog upon testing, but we did not test with another remote. Buttons seem to be stuck on the remote. Includes Timer Remote

3.) Unit #3 serial number 108824 and dated in 1993 heats up fine and has been the best of all of these machines through the years (no remote included on this unit), but doesn't seem to have maximum output. Pumps out fog, but sounds like there's a plugged line to prohibit max output. No Timer Remote

4.) Unit #4 serial number 4276 and dated 1992 is just for parts. The top went missing when it was being rebuilt and painted. It does have a heat exchanger, main board and pump. These items were working in 2004 when they were tested, but cannnot be guaranteed today. If you bid and don't want to ship the frame, we can remove the heater, pump and board and pack them inside the other machines to save shipping. AS-IS and parts only.

Shipping & Payment: Payment due within 7 days via Certified Funds, Money Order, Cash or PayPal. Shipping these can be done a couple of ways. 1.) UPS Ground ship each machine in a seperate box at about $35 per box. 2.) UPS Ground ship two units per box at about $50 per box in the 48 states. or 3.) Palletize all four machines and send them motor freight through your preferred carrier. I do not have any discounts with common carriers for LTL shipments, but I will palletize these four machines at no cost if you would like to have them picked up from our warehouse in zip code 80027.  Please email or call (720) 436-2388 with any questions you may have.  Again, these are being sold AS-IS in unknown working condition for parts and rebuild ONLY, even if a couple of them work.   

Thanks for looking and happy bidding!