Home Brewing Cornie Keg Kit Three Cornelius Kegs

Kit comes assembled

This kit has everything you need to dispense your homebrewed beer (except the beer); you have to make that yourself.  This kit also can be used for events or outside.  As such, the kit can be portable.

The Kit Includes:

• A new (empty) Aluminum 5 lb. CO2 cylinder
• 2 gauge CO2 regulator with check valve
• 3' of commercial grade 5/16 gas hose connected to a air manifold, 3 pieces of 4' of commercial grade 5/16 gas hose with keg dis-connects are attached to the manifold
• 3 pieces of 5' of beer hose setup, fully assembled with dis-connects, and picnic taps.
• Cornelius style 5-gallon ball lock kegs, reconditioned and pressure tested.
• This kit can also be made to different specifications - E-mail me at address below if needed

Everything in this kit is new (except the keg)  

Kegs have been dis-assembled, inside cleaned with a PBW solution, washed and cleaned on the outside, re-assembled with new o-rings on the dip tubes and poppets, a new o-ring is placed on the lids, and the cornies are pressure-tested.  All decals and stickers, and glue have been removed.  Kegs are also "polished" on the outside.   The kegs you receive will not be the ones that are shown in picture.  Kegs will be shipped with black tops and bottoms, other colors available upon request.  However, please note there is a limited quantity of other colors.    Please allow seven to 14 days for delivery.  

E-mail me at terry@kegglebrewing.com with any questions or comments.