Honeywell SFC Smart Field Communicator

Model: STS103-001-00006-24,1S

This communicator is brand-new with Honeywell’s original package

Model STS103 communicates with the Honeywell Smartline products including:

• ST 3000 Pressure and Differential Pressure Transmitters

• STT 3000 Temperature Transmitters

• MagneW 3000 Magnetic Flowmeters

• SCM 3000 Smart Coriolis Mass Flowmeters

• SGC 3000 Gas Chromatograph

• SMV 3000 Smart Multivariable Transmitters

• SLT—Drexelbrook Level Transmitter

The SFC has many functions. It can:

Select the Communications Mode

 –The transmitter can be configured to transmit its output in either an Analog (4 to 20 mA) mode or in the Digital Communications (DE) mode.

Configure

 - operating parameters such as LRV, URV, Damping, Failsafe mode, and Input actuation type for the STT may be programmed into the transmitter using the SFC.

Diagnose

 - access the Smart Transmitter’s self-diagnostic capabilities to troubleshoot suspected oper-ation or communication problems.

Check Calibration

 –The SFC provides a simplified procedure for checking calibration of Smart Transmitters, thus maintaining excellent transmitter accuracy and significantly reduced maintenance requirements. The accuracy of the SFC’s digital readout of the transmitter’s output may be certified allowing the STS103 to be used as part of calibration schemes following ISO 9000 procedures. Re-ranging of the transmitter is also possible using the STS103.

Display

- All configuration parameters as well as other data such as PROM/serial number, tag name, sensor temperature (ST), hi/lo PV (STT), and scratch pad memory can be readout on the two line LCD display. The STS103

also displays measured process variables (pressure, differential pressure, flow rate) in selectable engineering units.

Checkout

 - By configuring the transmitter for the output mode you can command the smart

transmitter to transmit a precise signal, selectable from 0% to 100% full scale, to assist in verifying loop operation, loop calibration, or troubleshooting.

Call 416-800-8106 for more information or visit www. okaway.com