Infant Nursery digtal wireless Audio&Video baby monitor

Pack Listing: Wireless Camera x 2(pink &blue) Wireless Receiver x 1 AC Adapter For Camera x 2 AC Adapter For Receiver x 1 Lithium Battery For Receiver x 1 Video Cable x 1 Earphone x 1 Move your mouse on the small picture to Enlarge picture   Specification:   ITEM Value General Transmission Frequency ISM 2,400 ~ 2,483 MHz Transmission Power 10mW/CE; 2mW/FCC Unobstructed Effective Range 100m(Min.) Spread Spectrum FHSS Modulation MODE GMSK Operating Temperature -10OC ~ +50OC / +14OF ~ +122OF Operatiing Humidity 15%~85% Camera Imaging Sensor Type CMOS Picture Total Pixels 720 x 576(PAL) 720 x 480(NTSC) Minimum Illumination 0Lux(IR ON) Night Vision Distance 3m(Min.) View Angle 40° Bandwidth 1.5MHz Image Resolution 320 x 720 x 576(PAL)240@10fps Sound Detection Sensitivity >65dB Consumption Current(Max.) 350mA Power Supply 5VDC Dimensions(W x D x H) 86 x 48 x 135 mm Weight(About) 146g Receiver LCD Screen Type 2.36＂TFT-LCD Effective Pixels 480×234 Receiving Sensitivity ≤-85dBm Consumption Current(Max.) 200mA Battery Working Time 5 hours Battery Charging Time 5 hours Power Supply 5VDC Dimensions(W x D x H) 86 x 54 x 143 mm Weight (About) 130 g Installation: Locate the camera to a desired position and then adjust it to a suitable angle. Connect the adapter to the camera Tip: After the camera is powered on, touch the pole once with finger(s) to turn on the baby lights; touch again to turn off it; hold the pole and the lights will blink. Install the accompanying Li-batteries to the battery compartment with its polarities matched. Note: This receiver can also be powered on by adapter. The Li-battery will be charged after the adapter is plugged in, and the charge indicator lights in red during charging and will turn off after a full charge. A full charge will take about 5 hours, which can power the receiverfor about 2 hours continuously. You are recommended to have the battery fully charged before its first installation to optimize its life. Do not burn or disassemble the Li-battery. Do not short-circuit the battery, it may cause fire or electric shock. Slide the power switch to the ON position. By pressing the channel button of the receiver to switch be the same channel of the camera, and then an image will appear on the screen. NOTE: Generally the channel of the camera is matched to the receiver at factory. If it isn't, follow the steps below: By pressing the channel button on the receiver and the check code button on back part of the camera at the same time for about 5 seconds, the receiver will automatically switch to the same channel of camera. An image will appear on the screen, means the two devices are now matched to each other Tune the volume control to a desired level. NOTE: for more clear pictures, please connect the receiver to a monitor/TV with the supplied video cable CAMERA CHANNEL SETUP: The receiver supports up to 4 cameras working at the same time.Please set the channel switch on the back cover as the following diagram: CAUTIONS: The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus Turn off the camera/receiver if the system is not in use The camera/receiver can only be completely disconnected from themains by unplug the adapter Do not cut the DC power cable of the apparatus to fit with another power source Attention should be drawn to the environment aspects of battery disposal FCC information: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: this device may not cause harmful interference. this device must accept any interference received, including interference that may cause undesired operation.Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment.

We only ship to US ,Canada

Items are usually shipped 1-3 business days after payment has been received.We do not ship on weekends and holidays

Sellers are not responsible for service transit time. Transit times are provided by the carrier, exclude weekends and holidays, and may vary with package origin and destination, particularly during peak periods.

International buyers are responsible for duties and customs fees.

Tracking numbers will be sent to all customers upon package shipment.

UPS Ground is not available for HI, AK, PR, APO/FPO. UPS only ship to USA continental address.

Canadian need pay customs duty and UPS import handling fee .

We only accept payment transactions via our online checkout system . We don't collect your financial information. Only Pay pal ID & shipping info is required. If you are a winning bidder to complete purchase, please click on the check-out now button. You will be able to complete your payment and finalize your purchase without waiting for an email confirmation:


click here You will be able to complete your payment and finalize your purchase without waiting for an email confirmation. After Winning an item in auction or completing a Buy-It-Now purchase, you have two check-out options: Check-Out Now! If you've already won this or another of our auctions, click on the Check-Out button or click here to immediately proceed with the checkout and payment process.


Our secure checkout system will give you a choice to pay with Paypal. All Paypal payments must be made thru the checkout system. Payment is required within 7 days of the end of the auction. If payment is not received within 7 days, the item will be re-listed, and an unpaid item strike will be filed.

Please leave us positive feedback upon satisfactory receipt of the item.

We have a program that automatically replies as soon as you leave your feedback. We care about our valued customers, and will always try to help you. So if you have any problems, please e-mail us immediately. Please give us the opportunity to resolve a problem. We understand the concerns and frustrations you might have, and will try our best to resolve the issues. Please email us before leaving negative feedback. All communications are handled through Email. We strive to answer all emails as quickly as possible, but due to high email volume it may take time for us to reply. Thanks in advance for your patience. Due to some ISP SPAM filter settings, you may not be able to receive our email replies; if you have problems receiving our emails, you may need to use a different email account to contact us.

We appreciate your positive eBay feedback.

Returns are permitted and must be initiated by the buyer within 30 days from the date of purchase.

In order to return an item you must contact us to request a Return Merchandise Authorization Number (RMA).

All non-defective, undamaged products are subject to a 15% restocking fee (except where prohibited by law) if returned opened or in a non-factory sealed box. There is no restocking fee for damaged or defective products. Shipping and handling fees are absolutely non-refundable.

Your return must include the following or it will be rejected by our warehouse and returned back to you:

Founded in May-11-1998 in United States, NOVAPCS continues to excel in the electronic distribution business following its goal to be the electronic component distributor of choice.our specializes in Video cards, DVD Burners, MP4 players, SD/MS memory cards and related electronic products such as USB flash drives, mobile phone chargers and batteries with competitive price and reliable quality. Delivery lead time is significantly shorter as our headquarters and shipping department was seated in New York. Goods can be shipped from either USA or China for client's convenience and sake.
We offer :
Video card:ATI/Nvidia,Mp3/Mp4 Player/PMP player, Mainboard, Network Parts, USB Flash disk (USb Pen Driver), Memory card, USB Control card,DC charger,TV capture Series, Wireless Series.