This auction includes only what is shown in the pictures.
Quantity: 1
inches processed: 60
inches burned: 0
-------------------------------
Printing Method
The 3400, 3440, and 3600 printers are capable of direct thermal (DT) printing or thermal transfer (TTR) printing using thermal transfer ribbon.
Environment
Operating 50°F to 104°F (10°C to 40°C)
Humidity 10% to 90% noncondensing
Self-Strip (Optional)
The self-strip rewinder hub can take up the backing of an entire 6,000-inch roll of media.
Communications
Asynchronous RS-232C, RS-422, RS-485 interfaces
Serial ASCII code
Hardware (Ready/Busy) Flow Control
XON/XOFF Protocol
Intermec Standard Block Protocol
Polling Mode D Protocol
Multi-Drop Protocol
Baud Rates: 1,200, 2,400, 4,800, 9,600, 19,200, 38,400
The following table provides the maximum baud rates for the printers.
Dimensions (no options installed)
Height 11 inches (27.9 cm)
Width 10.5 inches (26.7 cm)
Length 17 inches (43.2 cm)
Weight 35 pounds (15.8 kg)
Printhead
Printed dot size 0.00492 inch square (0.127 mm)
Width 4.1 inches maximum (104 mm)
Resolution 203 dots per inch (8 dots per mm)
Number of elements 832 per printhead
“X” dimensions 10 mil to 50 mil (0.25 mm to 1.27 mm); 5 mil (0.13 mm) in drag mode only (specified media only)
Ribbon
Roll 6,000 linear inches (152 m)
Widths 2.0 inches (51 mm)
3.0 inches (76 mm)
4.1 inches (104 mm)
Diameter 2.25 inches maximum (57 mm)
Printing Speed
Maximum 6 inches per second (152.4 mm per second) (3400C only)
Minimum 2 inches per second (50.8 mm per second)
You can change the print speed in 1 ips increments only: 2, 3, 4, 5 or 6.