Attention all Foam, Coatings and bedliner contractors!Here is another deal for you from Professor Foam! 
This is an auction for a transfer pump. Well that is not the most exciting part,
but it can stop you dead in your tracks and cost you lots of $$!
Most distributors are sending units out with OP 232C Gusmer pumps:
2 Main problems with them:
1) COST! $$$ then there is the cost and finally the cost!
2) The plastic washers in the air motor and the tank attachments always breaking.
This pump that I'm offering is an IPM 02 2:1
It has no plastic washers to break! The air motor has o rings that will last much longer!
The output is well above any production to most spray units! See chart below for exact specs.
| | IP-02 |  |
Pressure Ratio: | 2:1 |
Max. fluid flow: | 2.5gpm (9.5 lpm) |
Air motor diameter: | 1.4" (3.6cm) |
Air inlet pressure range: | 30 - 180 psi (2 - 12 bar) |
Max. fluid pressure: | 360 psi (24 bar) |
Air inlet size: | 1/4" npt (f) |
Fluid inlet size: | 3/4" npt (m) (Stubby) |
Fluid outlet size: | 3/4" npt (f) |
Rod and cylinder | CS & SST |
Throat packing: | Teflon |
Piston packing: | Teflon |
Length (Drum length):
(stubby): | 50" (1270 mm)
30.2" (768 mm) |
Weight: | 16.1 lb (7.3 kg)
14.1 lb (6.4 kg |
This pump retails for over $800.00 Ouch!!!!
I'm offering to you for a low cost of $699.00 including shipping!!!!!
I have been in the coatings and foam industry for 12+ years and know what works and what doesn't!
I am NOT a sales man from some supplier but one of you!
Hey guys I am concerned about the pricing at graco and this is one of the ways I'm improving my bottom line, not Graco's or some other suppliers pockets!!
I can get this overnighted to you, call me for a quote.
I will ship this international, please call me for a shipping quote
Side note on the shipping cost. EBAY doesn't include the shipping and handling charges on the final valuation fee. So in keeping with ebays policies, I am lowering the sale cost and charging a shipping and handling charge. This will help me keep my overhead down so I can keep my prices low to you! Just so you all know, EBAY effective 2-20-08 has increased the fees they charge me by over 3.5% to a final cost of 8.75% or 12% depending on how this is sold. I am doing my best to keep the prices low, so please understand this shipping and handling charge.
Ok if you want more information drop me a line..
CALL TODAY! 318-880-7787 its my cell phone...
Thanks!
Last note:
Graco has just introduced the T1, its basically the same as the IPM-02 but its cost is $975.00! Graco's way of saying thanks! Thanks for your hard earned $$!
Glascraft is next!~!
Track up to 10 items on this computer in 
)
