Klasse Car Care Kit
Includes: 1-10 oz. All-In-One Polish
1-16.9 oz. High Gloss Sealant Glaze
1-16"x16" Microfiber Detailing Towel
2- Terry Cloth Applicator Pads
2- Poly Foam Applicator Pads
A $55.85 Value. Save $10.85!
KLASSE ALL IN ONE POLISH: This bottle contains 10 ounces of pure polish. This acrylic based product will remove oxidation, minor swirls, old wax, and other surface blemishes; leaving a beautiful and deep acrylic shine. All In One Polish will bond to the paint surface, but will not cause any change to the paint composition. No need to worry about drying time. All-in-One dries quickly with no risk of hazing or streaking. All-In-One contains no abrasives or silicones, and does not stain plastic, vinyl or rubber trim. It can be used on any non-porous surface, and in addition to car care it is also approved for marine and aviation use. One or two applications every year is sufficient for most vehicles.
KLASSE GLOSS SEALANT GLAZE: This 100% acrylic based, 16.9 ounce sealant will give your car that deep mirror shine that reflects beautifully with diamond-like facets for six months or longer. When used in conjunction with Klasse All In One Polish, you will see scratch marks and paint discolorations disappear. This gloss hides and removes more swirls than any other brand, and provides the ultimate protection in extreme weather. There are no cleaning or polishing agents or water in the composition of the sealant. Klasse High Gloss Sealant Glaze creates an elastic, non-chip, shrink- proof, heat and scratch resistant - protective seal against ultraviolet rays, salt water, acid rain and industrial pollutants for up to 12 months. Use this glaze on all paints with or without clear coats, glass, fiberglass, Plexiglass, plastics, metal surfaces, enamel, tiles, Formica and all non-porous surfaces. It is also anti-static and non-abrasive, and contains no ingredients harmful to paint, metal or plastic.
COBRA MICROFIBER DETAILING TOWEL: This Klasse Kit comes with one Cobra Microfiber Detailing Towel, a dense, thick, and soft fabric towel that ranks above average in the car care industry. Your Klasse products will penetrate the fibers of this Cobra Microfiber Detailing Towel. There are over 200,000 absorbent fibers per inch, an amazing feat by the Cobra design team. This towel is manufactured with a unique process known as “splitting”, which refers to the method by which the polyester (the scrubbing fiber) is “split” from the polyimide (the absorbing and quick drying fiber). Once the microfibers used in the Cobra Microfiber Detailing Towel have undergone the “splitting” process, the strands are then densely woven into thousands of tiny “loops” that form hook-like claws that act as scrubbers, and can gently get into even microscopic crevices and crannies, lifting away dirt particles and trapping them within the weave.
2 TERRY APPLICATORS: These applicators are soft and gentle on your car’s surface. Use them with your Klasse All-In-One Polish for optimum results. We recommend machine washing of the applicators after use.
2 POLY FOAM WAX APPLICATORS: These applicators, when used to apply the Klasse Gloss Sealant Glaze, will ensure even distribution and unbeatable results. They are machine washable after use.
Tips for Klasse All-in-One Polish
Be Sparing with the Polish. One to two ounces is usually enough per job.
Substitute Steel Wool. Use steel wool in place of your applicator for severe oxidation on metal surfaces.
Works as a Car Wash. Use a capful in your bucket. The solution won’t be foamy, but it will work effectively to lift dirt from the surface.
Take it Inside. Polish jewelry, fine silver, brass and other metals.
Keep it cool. Never polish on a hot surface. Klasse All-In-One Polish works best in the 60º to 85º degree range.
Remove cloudiness that occurs on plexiglass, soft acrylic and hard acrylic windows with this polish.
Tips for Klasse High Gloss Sealant Glaze
Apply Multiple Coats. This will increase the clarity of the reflective shine, and deepen the overall mirror like finish.
Be Thorough. Use long, layered strokes for an end result that is uniform and beautiful.
Wait In Between Coats. Usually 8-12 hours is a good span of time in between coats.
Manufactured in Germany.
On Jul-26-05 at 19:07:24 PDT, seller added the following information:
| After purchasing, pay instantly with your credit card through PayPal! |
|
     |
Track up to 10 items on this computer in 
)
Save on shipping - 