LGB compatible Any Scale Train Throttle 24V 30A/12.5A

SL-TLC12F DC Analog Throttle

Pure DC output; 0 to 24 V @ 12.5A - On demand cooling fan control

ANY scale - G, O, HO, N, or Z!

Buy it now price: $199.95 New

Features:

• Input voltage at 10 to 24 volts
• 30 amp output stage - conservatively rated at 12.5 amps continuous
• Low noise, brushless fan ball bearing fan with on demand speed cooling
• Smooth speed control
• Pure DC output with 150 watt heat dissipation rating
• Up to 30 amps of output current at full throttle
• LED power good status indicator (LED is lit red when input power is good)
• LED fault indicator (LED off when fault condition exists)

The TLC12F Throttle uses an input of 10 to 24 volts AC or DC. Cooling is provided by a bushless ball bearing fan speed controlled to match power output so it's off when your trains are stopped of running slow and increases as your use more power. Works with any scale trains and any input voltage from 10 to 24 volts. The throttle employs a 30 amp output stage but is conservatively rated at 12.5 amps continuous output. This unit is both a table-top and a hand held throttle.

Photos:

	The picture above shows the tabletop configuration with input/output connectors on top and connections to power supply and track power clips for G scale rails..
	The picture above shows the walk around configuration with input/output connectors on bottom. The connectors can be placed on the bottom in less than two minutes by removing the faceplate and rotating the case 180 degrees as shown below.
	In this configuration the unit is ideal for a palm held or walk around throttle with the input/output connectors coming out the bottom.
		DC power in and track power cables connect with just a screw driver and take up to 14 gauge wire for long runs at full power.
	The throttle features a large forward/reverse switch and a quick response throttle. An exclusive emergency stop feature turns off all power output by simply pushing down on the throttle. Pulling the throttle out restores power.

Specifications:

Mfg: Made in the USA by Scale Lights - Soft Works Ltd.

Input Voltage: `10 to 24 V DC

Input Current: 12.5 amps continuous at 24 Volts

Output Voltage: 0 to maximum input voltage

Output Current: 12.5 amps continuous

Cooling: Provided by a low noise, voltage stabilized, brushless fan powered by input voltage via a auto speed control circuit that varies speed with output power.

Dimensions: 5.25L" x 3.25W" x 1.5"H (2.5H with throttle knob height") Palm Size for optional walk around use.

Weight: 9.5 Oz.

Connectors:

1 ea. 4 terminal block screw connector for 22 to 14 gauge wire
		Two terminals are available for input power. These are used to connect the throttle with the SL-PS200-1-27F, SL-PS300-1-27F or the SL-PS800-3-28 power supply by ShourtLine as shown below.
				SL-PS200-1-27F 24V 8.3A 200Watts
		SL-PS200-1-27F&TLC8F&Track Clips 24V 8.3A 200Watts
				SL-PS300-1-27F 24V 12.5A 300Watts
		SL-PS300-1-27F&TLC12F&Track Clips 24V 12.5A 300Watts
				SL-PS800-3-28 24V 32.5A 800Watts
		PS800-3-29F&TLC8F&Track Clips 24V 8.3A 200VA
		The other two terminals provide adjustable continuous pure DC power to your LGB trains or other DC loads.
Questions? Email SL-TLC12F@ShourtLine.com by clicking here Thanks for looking - Shourt Line by Soft Works Ltd. copyright 2007 Shourt Line - Soft Works Ltd. all rights reserved