Ladder rack Chevy Dodge Ford GMC Van BLACK RACKS 3 BAR - eBay (item 370049966690 end time May-17-08 20:58:31 PDT)

To order by phone please call 888-497-9555

Vantech 2008' 3 bar Ladder rack system for Full size vans (Black Racks)

Part # 2080-3B

New arrival 2008' model H1 ladder rack system. The part # 2080-3B system is a bolt-on system and does not require any drilling. It uses a rubber coated 11 gauge 2x8 clamp that bolts onto the underside of the drip rails. The cross bars 14 gauge steel rectangular 2" x 1". The mounting bases are 8" wide and 11 gauge steel. All of our 3 bar Bolt-down systems includes angle support, ladder positioners and EZ-Velcro ladder strap. All of our supports are coated in rubber for extra protection.

We have the following applications available for the vehicle shown below. Please let us know the make, model and year of vehicle when purchasing by calling in @ 888-497-9555 or making a note during paypal transaction. If you do not see a particular model please or would like a custom system call 888-497-9555.

Chevrolet Full-size	1975-1995
Chevrolet Full-size *	1996-2008 *
Dodge Full-size	All years
Dodge Sprinter Low top	2000-2006
Ford Full-size	1975-1991
Ford Full-size *	1992-2008 *
GMC Full-size	1975-1995
GMC Full-size *	1996-2008 *

Note: Will work on all extended models, 1 ton, 2 ton, and 3 ton. * Due to the slight arch in the center of the vehicle our mounting bases are 1/2" shorter to accommodate the height difference.

Click to enlarge

	Maximum load capacity of 750 lbs 3 Bar kit (evenly distributed)
	No drilling required
	14 gauge high strength steel 2" x 1" rectangular cross bars
	11 gauge high strength steel mounting bases
	8" extra wide mounting bases
	16.5" low roof clearance from drip rails
	7" Clearance from drip rail to the bottom of the cross bars

	Rubber coated drip rail clamps to avoid metal scuffing
	Powder coated high-gloss black finish
	4 eyehooks per mounting base (24 eyehooks total)
	Includes adjustable ladder positioner and angle ladder support
	All supports are coated in thick rubber for long lasting protection
	5 year limited warranty (read warranty below for more information)

Click to enlarge

Distributed by The Works Heavy Industries

Product Content 3 bar system Black

Is tubular and telescopic bars stronger than rectangular bars? Tubular bars and square bars can only handle a small portion of the weight of a rectangular bar. The weakest systems are telescopic bars. Telescopic bars can bend and flex by the middle because it is a 2 piece system sliding into each other (male/female design) and fastened by a single bolt. Some manufacturers claim to be able to hold 300lbs-400lbs per bar, but is that's evenly distributed weight? Can their system hold the weight down on a emergency stop? That's a lot of weight.


Brand "X" 4" wide rack base	Brand "X" 2" wide rack base		H1 system 8" Wide 11 gauge steel rack base
Is it safer to use a wider base than oppose to a shorter base? Most van racks can hold 500lbs to 750lbs. Can it also hold the same weight during an emergency stop or a frontal impact which is many times the weight it is carrying. That is why we made our system using an 8" wide base and 11 gauge thickness to try to prevent such an occurrence. Watch the video above. We lifted the rear of a Dodge 2500 (Total vehicle gross weight 7360lbs.) with our forklift using only a 1 bar system in the rear. Please do not try this at home or at work.
		Compare to H1
1 Eyehook opening for bungee tie down	2 Eyehook opening for bungee tie down		H1 system x4 Eyehook opening for bungee tie down

		Click to view

Contact

Call Toll Free

888-497-9555

Hours of operation

Monday thru Friday	10am-7pm	Eastern time
Saturday	12pm-5pm	Eastern time
Sunday	Closed	Eastern time

To order by phone. We accept the following merchant cards.

ATTENTION!!!

We do our best to respond to all e-mails the same day except weekends. If you have a time-sensitive matter, please use the "high priority" setting for your email (or write "urgent" in the subject line). Include a phone number and a good time to call. We will try our best to get back within the 12-14 hours. For more information please call 888-497-9555 or e-mail us. We can also take orders over the phone. Please have the ebay item # ready so we can offer the same great deal given on Ebay.

Shipping

Packages will be shipped via DHL. Please allow 5-7 business days upon arrival to destination. Be aware that sometimes packages will not get to destination on time due to weather conditions or suburban locations. Please provide us with your telephone # in case there is a problem. We regret that this item can not be shipped to PO boxes. This item can be combined with other accessories, But not complete rack systems.

Warranty

5 year Limited warranty will only apply to those who submit their warranty card by e-mail to sales@vantech.us . When e-mailing warranty information please provide us with the invoice number, name, address and date of purchase. Non-registered warranty claims will not be excepted after 30 days of receiving item. Covered on the warranty are as follow: Cross bars, mounting bases, brackets and supports. Hardware such as nuts, bolts, washers and gaskets are not included in the warranty. Warranty does not cover bent or warped cross-bars. Customers must cover all shipping.

Claims for Shipping Damages

Product that are damaged during transport must be reported to the carrier within 24 hours after receiving delivery. Otherwise customer will be held liable for all damages acquired through shipping. Please inspect all packages thoroughly before signing acceptance of shipment.

Return Policy

Unused merchandise may be returned freight pre-paid in the original shipping packaging with all labels, hardware, instructions. All returns must be accompanied by a RGA and a copy of the original receipt. The RGA # must be issued within 30 days from the date of delivery. Products can not be returned after 30 days. Any items sent freight collect will be refused and returned at shippers expense. All returns are subjected to a 30% cancellation fee/return fee. Customer pays all shipping and handling charge going to and from destination. When the item have been examined and the reason of return is verified, you will be issued a refund. Refund will be issued by company check to the receiver and will take approximately 5-7 business days to process.