Instructions for application:

1. Clean your wall or surface
Be sure that the surface you are applying the Vinyl Wall Art Decal to is: smooth, dry and free of
dust and dirt. Vinyl Wall Art Decals can be applied to walls, wood, glass, concrete, metal or any
smooth, dry surface. Vinyl Wall Art Decals are removable but may not be repositioned or reused.
Do not apply to freshly painted walls! Wait a minimum of 2 weeks after painting.

2. Prepare the Vinyl Wall Art
Lay each Vinyl Wall Art Decal on a flat surface, graphic side down. Press firmly over the entire
decal with the edge of a credit card or similar object. You are re-activating the bond between the
decal and the transfer tape.

3. Plan your layout
Arrange your Vinyl Wall Art Decal on your surface using masking tape (on the top edge only), do
not remove the white backing until you are happy with your layout.

4. Apply the Vinyl Wall Art
Flip the decal up. Starting from any corner, slowly peel the white backing away from the transfer
tape, the vinyl decal should be sticking to the transfer tape. If some of the decal remains stuck to
the white backing, stop. Rub the decal in that area and slowly continue peeling until the white
backing is completely removed.  As you lower your Vinyl Wall Art Decal against the surface
carefully move your hand slowly across the decal, starting at the top center and working your way
out  to the edges and bottom of the decal. With your finger or credit card finish the application by
rubbing over the entire graphic to remove any air bubbles. Once you have removed the air bubbles
carefully remove the transfer tape making sure that the decal is sticking to your surface and not the
transfer tape.

Warning: Speedway Sign Shop is not responsible for any damage caused by applying or
removing a decal from any surface. Apply Vinyl Wall Art Decals at your own risk.